[PATCH 6/8] arm64: dts: qcom: eliza: Add GPU SMMU node

[Konrad Dybcio]

On 7/6/26 1:07 PM, Konrad Dybcio wrote:
> On 7/5/26 10:14 AM, Akhil P Oommen wrote:
>> From: Abel Vesa <abel.vesa at oss.qualcomm.com>
>>
>> Add the nodes to describe the GPU SMMU.
>>
>> Signed-off-by: Abel Vesa <abel.vesa at oss.qualcomm.com>
>> Signed-off-by: Akhil P Oommen <akhilpo at oss.qualcomm.com>
>> ---
>>  arch/arm64/boot/dts/qcom/eliza.dtsi | 38 +++++++++++++++++++++++++++++++++++++
>>  1 file changed, 38 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/eliza.dtsi b/arch/arm64/boot/dts/qcom/eliza.dtsi
>> index c5635f22e2a7..e5b8377e6c3a 100644
>> --- a/arch/arm64/boot/dts/qcom/eliza.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/eliza.dtsi
>> @@ -2674,6 +2674,44 @@ mdss_dp0_out: endpoint {
>>  			};
>>  		};
>>  
>> +		adreno_smmu: iommu at 3da0000 {
>> +			compatible = "qcom,eliza-smmu-500", "qcom,adreno-smmu",
>> +				     "qcom,smmu-500", "arm,mmu-500";
>> +			reg = <0x0 0x03da0000 0x0 0x40000>;
>> +			#iommu-cells = <2>;
>> +			#global-interrupts = <1>;
>> +			interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
> 
> 674 is the correct globla

(modulo the issue i explained below)

[...]

> This list is not quite correct. It must be sorted by the context index,
> to which a given interrupt corresponds to - the driver relies on that
> to give you information about where a context fault happens
> 
> Moreover, I see that the interrupt sheet has the bug where some
> interrupts are offset by 32 from the base vector, and others are offset
> by 31 (i.e. the SPI number doesn't equal irq vector - 32) - please find
> out which mapping is correct with the right folks

Konrad