[PATCH 2/2] arm64: dts: s32g3: Correct indentation

Ghennadi Procopciuc ghennadi.procopciuc at oss.nxp.com
Mon Jul 6 03:15:52 PDT 2026


On 7/6/2026 12:34 PM, Krzysztof Kozlowski wrote:
> Correct spaces or mix of tabs+spaces into proper tab-indented lines.
> No functional impact (same DTB).
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/freescale/s32g3.dtsi | 32 ++++++++++++------------
>  1 file changed, 16 insertions(+), 16 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/s32g3.dtsi b/arch/arm64/boot/dts/freescale/s32g3.dtsi
> index 22e80fc03f9c..6eafa9139557 100644
> --- a/arch/arm64/boot/dts/freescale/s32g3.dtsi
> +++ b/arch/arm64/boot/dts/freescale/s32g3.dtsi
> @@ -534,22 +534,22 @@ usbmisc: usbmisc at 44064200 {
>                         reg = <0x44064200 0x200>;
>                 };
> 
> -                usbotg: usb at 44064000 {
> -                        compatible = "nxp,s32g3-usb", "nxp,s32g2-usb";
> -                        reg = <0x44064000 0x200>;
> -                        interrupt-parent = <&gic>;
> -                        interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, /* OTG Core */
> -                                     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; /* OTG Wakeup */
> -                        clocks = <&clks 94>, <&clks 95>;
> -                        fsl,usbmisc = <&usbmisc 0>;
> -                        ahb-burst-config = <0x3>;
> -                        tx-burst-size-dword = <0x10>;
> -                        rx-burst-size-dword = <0x10>;
> -                        phy_type = "ulpi";
> -                        dr_mode = "host";
> -                        maximum-speed = "high-speed";
> -                        status = "disabled";
> -                };
> +               usbotg: usb at 44064000 {
> +                       compatible = "nxp,s32g3-usb", "nxp,s32g2-usb";
> +                       reg = <0x44064000 0x200>;
> +                       interrupt-parent = <&gic>;
> +                       interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, /* OTG Core */
> +                                    <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; /* OTG Wakeup */
> +                       clocks = <&clks 94>, <&clks 95>;
> +                       fsl,usbmisc = <&usbmisc 0>;
> +                       ahb-burst-config = <0x3>;
> +                       tx-burst-size-dword = <0x10>;
> +                       rx-burst-size-dword = <0x10>;
> +                       phy_type = "ulpi";
> +                       dr_mode = "host";
> +                       maximum-speed = "high-speed";
> +                       status = "disabled";
> +               };
> 
>                 spi0: spi at 401d4000 {
>                         compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi";
> --
> 2.53.0
> 

Reviewed-by: Ghennadi Procopciuc <ghennadi.procopciuc at oss.nxp.com>

-- 
Regards,
Ghennadi



More information about the linux-arm-kernel mailing list