[PATCH v4 7/9] arm64: dts: qcom: shikra-cqm-evk: Enable A704 GPU

[Akhil P Oommen]

From: Aditya Sherawat <asherawa at qti.qualcomm.com>

Enable the A704 GPU and configure its zap-shader firmware on the
Shikra CQM EVK board.

Signed-off-by: Aditya Sherawat <asherawa at qti.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo at oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts b/arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts
index 269e11bd44f6..8206dddcfc75 100644
--- a/arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts
+++ b/arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts
@@ -50,6 +50,14 @@ &remoteproc_mpss {
 	status = "okay";
 };
 
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/shikra/a704_zap.mbn";
+};
+
 &sdhc_1 {
 	vmmc-supply = <&pm4125_l20>;
 	vqmmc-supply = <&pm4125_l14>;

-- 
2.54.0