[PATCH v3 2/6] arm64: dts: ti: k3-j7200-ti-ipc-firmware: Reserve memory for LPM metadata

[Richard Genoud (TI)]

Declare a carveout memory region to store LPM metadata on J7200.

For Jacinto devices, this memory region is needed for saving ATF context
and the certificate information of ATF and OPTEE and DM image. This LPM
metadata area is firewalled to be accessed only by TIFS.

U-Boot R5 SPL/TIFS will use this area to save and restore:
- ATF context
- ATF certificate information
- OPTEE certificate information
- DM image (which has been copied in memory at boot time by U-Boot
  R5-SPL)

At resume, U-Boot R5 SPL is executed and detects that the board is
resuming (with a flag set in the PMIC), then it:
- brings out of retention the DDR
- retrieves the LPM memory region from DTS
- authenticates certificates from LPM memory region and applies firewalls
- asks TIFS to restore TFA and its own minimal context
- starts TFA on remote proc
- loads back DM image from memory and jumps to DM

As this is used by U-Boot SPL, bootph-pre-ram is added.

https://software-dl.ti.com/tisci/esd/latest/2_tisci_msgs/pm/lpm.html#lpm-msg-lpm-save-addr

NB: This memory region is not part of DM memory (which is not retained
at suspend)

Signed-off-by: Prasanth Babu Mantena <p-mantena at ti.com>
Signed-off-by: Richard Genoud (TI) <richard.genoud at bootlin.com>
---
 arch/arm64/boot/dts/ti/k3-j7200-ti-ipc-firmware.dtsi | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-ti-ipc-firmware.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-ti-ipc-firmware.dtsi
index d65f68c7d432..a6043970715a 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-ti-ipc-firmware.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-ti-ipc-firmware.dtsi
@@ -47,6 +47,12 @@ rtos_ipc_memory_region: memory at a4000000 {
 		alignment = <0x1000>;
 		no-map;
 	};
+
+	lpm_memory_region: memory at a4800000 {
+		reg = <0x00 0xa4800000 0x00 0x00300000>;
+		no-map;
+		bootph-pre-ram;
+	};
 };
 
 &mailbox0_cluster0 {
@@ -99,8 +105,10 @@ &mcu_r5fss0 {
 &mcu_r5fss0_core0 {
 	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
 	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
-			<&mcu_r5fss0_core0_memory_region>;
-	memory-region-names = "dma", "firmware";
+			<&mcu_r5fss0_core0_memory_region>,
+			<&lpm_memory_region>;
+	memory-region-names = "dma", "firmware", "lpm-metadata";
+	bootph-pre-ram;
 	status = "okay";
 };
 
-- 
2.47.3