[PATCH v1 09/15] arm64: dts: freescale: imx8mn-var-som: enable FlexSPI interface

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r at variscite.com>

Enable the FlexSPI controller on the VAR-SOM-MX8MN and add the
corresponding pin multiplexing configuration.

Signed-off-by: Stefano Radaelli <stefano.r at variscite.com>
---
 .../boot/dts/freescale/imx8mn-var-som.dtsi      | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
index 0abc2d33e711..259d9f36f8a3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
@@ -176,6 +176,12 @@ ethphy: ethernet-phy at 4 {
 	};
 };
 
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	status = "okay";
+};
+
 &i2c1 {
 	clock-frequency = <400000>;
 	pinctrl-names = "default";
@@ -456,6 +462,17 @@ MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x120
 		>;
 	};
 
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_ALE_QSPI_A_SCLK		0x1c4
+			MX8MN_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B		0x84
+			MX8MN_IOMUXC_NAND_DATA00_QSPI_A_DATA0		0x84
+			MX8MN_IOMUXC_NAND_DATA01_QSPI_A_DATA1		0x84
+			MX8MN_IOMUXC_NAND_DATA02_QSPI_A_DATA2		0x84
+			MX8MN_IOMUXC_NAND_DATA03_QSPI_A_DATA3		0x84
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c3
-- 
2.47.3