[PATCH] arm64: dts: rockchip: fix regulator names on NanoPC-T6

[Heiko Stuebner]

On Fri, 05 Jun 2026 13:54:35 +0200, Ricardo Pardini wrote:
> Three fixed-regulator names on the NanoPC-T6 don't match the board
> schematic [1].
> 
> - vcc3v3_pcie2x1l0 -> vdd_mpcie_3v3
>   This GPIO-switched 3v3 regulator is labeled vcc3v3_pcie2x1l0, but
>   it is wired to and consumed by &pcie2x1l1. Per the schematic,
>   the GPIO PCIE_M2_1_PWREN controls the power net VDD_MPCIE_3.3V;
>   rename to match.
> - vdd_2v0_pldo_s3 -> vcc_2v0_pldo_s3
>   Typo in the regulator-name property of RK806-1 DCDC reg7. The node
>   label and the schematic power-net name both already use the vcc_
>   form; only the regulator-name string had vdd_.
> - vcc3v3_pcie30 -> vcc3v3_pcie_m2_0
>   The GPIO-switched 3v3 feeding the M.2 M-Key (NVMe) slot is named
>   after the PCIe controller it sits behind rather than the schematic
>   power net. The schematic names it VCC3V3_PCIE_M2_0 (produced by an
>   MP2143-based buck off VCC_5V0, enabled by PCIE_M2_0_PWREN); rename
>   to match.
> 
> [...]

Applied, thanks!

[1/1] arm64: dts: rockchip: fix regulator names on NanoPC-T6
      commit: e53bb7bffd4d359b68e8256bc0ebf5a119ba3c71

Best regards,
-- 
Heiko Stuebner <heiko at sntech.de>