[PATCH 07/12] phy: phy-mtk-dp: Support setting volt swing and preemphasis values

[AngeloGioacchino Del Regno]

Add support for honoring the set_voltages request to set the
voltage swing and preemphasis values in the .configure() callback.

For proper hardware cleanup, reset both in the .reset() callback.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
---
 drivers/phy/mediatek/phy-mtk-dp.c | 41 ++++++++++++++++++++++++++++++-
 1 file changed, 40 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/mediatek/phy-mtk-dp.c b/drivers/phy/mediatek/phy-mtk-dp.c
index a2cd22b9da06..17d871530cca 100644
--- a/drivers/phy/mediatek/phy-mtk-dp.c
+++ b/drivers/phy/mediatek/phy-mtk-dp.c
@@ -48,6 +48,11 @@
 /* DP_PHYD_TX_CTL_0 */
 #define PHYD_TX_LN_EN			GENMASK(7, 4)
 
+/* DP_PHYD_DRIVING_FORCE */
+#define PHYD_DP_TX_FORCE_VOLT_SWING_EN	BIT(0)
+#define PHYD_DP_TX_FORCE_VOLT_SWING_VAL	GENMASK(2, 1)
+#define PHYD_DP_TX_FORCE_PRE_EMPH_VAL	GENMASK(4, 3)
+
 #define XTP_LN_TX_LCTXC0_SW0_PRE0_DEFAULT	BIT(4)
 #define XTP_LN_TX_LCTXC0_SW0_PRE1_DEFAULT	(BIT(10) | BIT(12))
 #define XTP_LN_TX_LCTXC0_SW0_PRE2_DEFAULT	GENMASK(20, 19)
@@ -101,6 +106,7 @@ enum mtk_dp_phya_ana_glb_regidx {
 };
 
 enum mtk_dp_phyd_dig_lane_regidx {
+	DP_PHYD_LAN_DRIVING_FORCE,
 	DP_PHYD_LAN_DRIVING_PARAM_0,
 	DP_PHYD_LAN_MAX
 };
@@ -121,6 +127,7 @@ static const u8 mt8195_phy_ana_glb_regs[DP_PHYA_GLOBAL_MAX] = {
 };
 
 static const u8 mt8195_phy_dig_lane_regs[DP_PHYD_LAN_MAX] = {
+	[DP_PHYD_LAN_DRIVING_FORCE] = 0x18,
 	[DP_PHYD_LAN_DRIVING_PARAM_0] = 0x2c,
 };
 
@@ -235,6 +242,28 @@ static int mtk_dp_phy_configure(struct phy *phy, union phy_configure_opts *opts)
 				   PHYD_TX_LN_EN, val);
 	}
 
+	if (opts->dp.set_voltages) {
+		const u32 reg_drv_force = pdata->regs_dig_lane[DP_PHYD_LAN_DRIVING_FORCE];
+
+		if (opts->dp.lanes > 4) {
+			dev_err(&phy->dev, "Wrong lanes config %u\n", opts->dp.lanes);
+			return -EINVAL;
+		}
+
+		for (i = 0; i < opts->dp.lanes; i++) {
+			const u32 off_dig_lane = pdata->off_dig_lane[i];
+			u32 val;
+
+			val = FIELD_PREP(PHYD_DP_TX_FORCE_VOLT_SWING_VAL, opts->dp.voltage[i]);
+			val |= FIELD_PREP(PHYD_DP_TX_FORCE_PRE_EMPH_VAL, opts->dp.pre[i]);
+
+			regmap_update_bits(dp_phy->regmap, off_dig_lane + reg_drv_force,
+					   PHYD_DP_TX_FORCE_VOLT_SWING_VAL |
+					   PHYD_DP_TX_FORCE_PRE_EMPH_VAL,
+					   val);
+		}
+	}
+
 	regmap_update_bits(dp_phy->regmap,
 			   pdata->off_dig_glb + pdata->regs_dig_glb[DP_PHYD_PLL_CTL_1],
 			   TPLL_SSC_EN, opts->dp.ssc ? TPLL_SSC_EN : 0);
@@ -329,7 +358,8 @@ static int mtk_dp_phy_reset(struct phy *phy)
 	struct mtk_dp_phy *dp_phy = phy_get_drvdata(phy);
 	const struct mtk_dp_phy_pdata *pdata = dp_phy->pdata;
 	const u32 reg_rst = pdata->regs_dig_glb[DP_PHYD_SW_RST];
-	int ret;
+	const u32 reg_drv_force = pdata->regs_dig_lane[DP_PHYD_LAN_DRIVING_FORCE];
+	int i, ret;
 
 	/* Clearing bits sets reset state */
 	regmap_clear_bits(dp_phy->regmap, pdata->off_dig_glb + reg_rst, DP_GLB_SW_RST_PHYD);
@@ -345,6 +375,15 @@ static int mtk_dp_phy_reset(struct phy *phy)
 	if (ret)
 		dev_err(dp_phy->dev, "Could not disable lanes during reset!\n");
 
+	/* Reset Voltage Swing and Preemphasis values */
+	for (i = 0; i < MTK_DP_PHY_MAX_LANES; i++) {
+		const u32 off_dig_lane = pdata->off_dig_lane[i];
+
+		regmap_clear_bits(dp_phy->regmap, off_dig_lane + reg_drv_force,
+				   PHYD_DP_TX_FORCE_VOLT_SWING_VAL |
+				   PHYD_DP_TX_FORCE_PRE_EMPH_VAL);
+	}
+
 	return 0;
 }
 
-- 
2.54.0