[PATCH v6 0/3] Add support for Variscite DART-MX8M-PLUS and Sonata board

Stefano Radaelli stefano.radaelli21 at gmail.com
Wed Jul 1 03:05:54 PDT 2026


This patch series adds support for the Variscite DART-MX8M-PLUS
system on module and the Sonata carrier board.

The series includes:
- SOM device tree with on-module peripherals
- Sonata carrier board device tree with board-specific features

The implementation follows the standard SOM + carrier board pattern
where the SOM dtsi contains only peripherals mounted on the module,
while carrier-specific interfaces are enabled in the board dts.

v5->v6:
 - 

v4->v5:
 - Fix nodes order

v3->v4:
 - Add snvs nodes

v2->v3:
 - Fixed wrong som eth phy address

v1->v2:
 - Fixed wrong sai peripheral reference
 - Fixed wrong eqos pinctrl gpio
 - Fixed model name
 - Added new usdhc2 regulator pinctrl
 - Adjusted irq edges

Stefano Radaelli (3):
  dt-bindings: arm: fsl: add Variscite DART-MX8M PLUS Boards
  arm64: dts: freescale: Add support for Variscite DART-MX8M-PLUS
  arm64: dts: imx8mp-var-dart: Add support for Variscite Sonata board

 .../devicetree/bindings/arm/fsl.yaml          |   6 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../dts/freescale/imx8mp-var-dart-sonata.dts  | 733 ++++++++++++++++++
 .../boot/dts/freescale/imx8mp-var-dart.dtsi   | 475 ++++++++++++
 4 files changed, 1215 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-var-dart-sonata.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-var-dart.dtsi


base-commit: d0c222c2e2ce577d801bdf129dc6c078f29e22df
-- 
2.47.3




More information about the linux-arm-kernel mailing list