[PATCH v2 5/9] arm64: dts: imx8mm-evk: add uart3 port

[Marco Felsch]

On 26-01-17, Frank Li wrote:
> From: Fugang Duan <fugang.duan at nxp.com>
> 
> Add uart3 port.

Would be nice to know why the port is needed? If it's just a UART on the
pin header I would rather keep it un-muxed to keep it easy to adapt the
EVK to dev needs.

Regards,
  Marco


> Signed-off-by: Fugang Duan <fugang.duan at nxp.com>
> Signed-off-by: Frank Li <Frank.Li at nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
> index 30b13b4d630f8b8b0531fad531081d4ee32849f9..8be44eaf4e1e0adc2921db8cc5f2dc69586b68cf 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
> @@ -627,6 +627,15 @@ &uart2 { /* console */
>  	status = "okay";
>  };
>  
> +&uart3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart3>;
> +	assigned-clocks = <&clk IMX8MM_CLK_UART3>;
> +	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
> +	uart-has-rtscts;
> +	status = "okay";
> +};
> +
>  &usbphynop1 {
>  	wakeup-source;
>  };
> @@ -819,6 +828,15 @@ MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
>  		>;
>  	};
>  
> +	pinctrl_uart3: uart3grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX		0x140
> +			MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX		0x140
> +			MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B		0x140
> +			MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B	0x140
> +		>;
> +	};
> +
>  	pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {
>  		fsl,pins = <
>  			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x1c4
> 
> -- 
> 2.34.1
> 
> 
> 

-- 
#gernperDu 
#CallMeByMyFirstName

Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | https://www.pengutronix.de/ |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-9    |