[PATCH RFC net-next] net: stmmac: enable RPS and RBU interrupts

[Russell King (Oracle)]

Enable receive process stopped and receive buffer unavailable
interrupts, so that the statistic counters can be updated.

Signed-off-by: Russell King (Oracle) <rmk+kernel at armlinux.org.uk>
---

Maxime,

You may find this patch useful, as it makes the "rx_buf_unav_irq"
and "rx_process_stopped_irq" ethtool statistic counters functional.
This means that the lack of receive descriptors can still be detected
even if the receive side doesn't actually stall.

I'm not sure why we publish these statistic counters if we don't
enable the interrupts to allow them to ever be non-zero.

 drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h
index 9d9077a4ac9f..d7f86b398abe 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h
@@ -99,6 +99,8 @@ static inline u32 dma_chanx_base_addr(const struct dwmac4_addrs *addrs,
 #define DMA_CHAN_INTR_ENA_NIE_4_10	BIT(15)
 #define DMA_CHAN_INTR_ENA_AIE_4_10	BIT(14)
 #define DMA_CHAN_INTR_ENA_FBE		BIT(12)
+#define DMA_CHAN_INTR_ENA_RPS		BIT(8)
+#define DMA_CHAN_INTR_ENA_RBU		BIT(7)
 #define DMA_CHAN_INTR_ENA_RIE		BIT(6)
 #define DMA_CHAN_INTR_ENA_TIE		BIT(0)
 
@@ -107,6 +109,8 @@ static inline u32 dma_chanx_base_addr(const struct dwmac4_addrs *addrs,
 					 DMA_CHAN_INTR_ENA_TIE)
 
 #define DMA_CHAN_INTR_ABNORMAL		(DMA_CHAN_INTR_ENA_AIE | \
+					 DMA_CHAN_INTR_ENA_RPS | \
+					 DMA_CHAN_INTR_ENA_RBU | \
 					 DMA_CHAN_INTR_ENA_FBE)
 /* DMA default interrupt mask for 4.00 */
 #define DMA_CHAN_INTR_DEFAULT_MASK	(DMA_CHAN_INTR_NORMAL | \
@@ -119,6 +123,8 @@ static inline u32 dma_chanx_base_addr(const struct dwmac4_addrs *addrs,
 					 DMA_CHAN_INTR_ENA_TIE)
 
 #define DMA_CHAN_INTR_ABNORMAL_4_10	(DMA_CHAN_INTR_ENA_AIE_4_10 | \
+					 DMA_CHAN_INTR_ENA_RPS | \
+					 DMA_CHAN_INTR_ENA_RBU | \
 					 DMA_CHAN_INTR_ENA_FBE)
 /* DMA default interrupt mask for 4.10a */
 #define DMA_CHAN_INTR_DEFAULT_MASK_4_10	(DMA_CHAN_INTR_NORMAL_4_10 | \
-- 
2.47.3