[PATCH 1/3] ARM: dts: imx6q-apalis: Remove the deprecated "reset-gpio-active-high" property

[Sherry Sun]

Commit 2e81122d681c ("PCI: imx6: Convert to use agnostic GPIO API")
deleted the "gpio_active_high" flag in pci-imx6 driver, so currently
the imx6 PCIe driver doesn't support "reset-gpio-active-high" property.
Let's remove this deprecated property in imx6q-apalis dts.

Fixes: 2e81122d681c ("PCI: imx6: Convert to use agnostic GPIO API")
Signed-off-by: Sherry Sun <sherry.sun at nxp.com>
---
 arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dtsi      | 1 -
 arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts | 1 -
 arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora.dts      | 1 -
 3 files changed, 3 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dtsi
index b6c45ad3f430..a5f3273e03e6 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dtsi
@@ -56,7 +56,6 @@ &pcie {
 	pinctrl-0 = <&pinctrl_reset_moci>;
 	/* active-high meaning opposite of regular PERST# active-low polarity */
 	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-	reset-gpio-active-high;
 };
 
 &pwm1 {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts
index 3ac7a4501620..f70351479995 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts
@@ -147,7 +147,6 @@ &pcie {
 	pinctrl-0 = <&pinctrl_reset_moci>;
 	/* active-high meaning opposite of regular PERST# active-low polarity */
 	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-	reset-gpio-active-high;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora.dts
index f338be435277..4fac26e26a4d 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora.dts
@@ -94,7 +94,6 @@ &pcie {
 	pinctrl-0 = <&pinctrl_reset_moci>;
 	/* active-high meaning opposite of regular PERST# active-low polarity */
 	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-	reset-gpio-active-high;
 	status = "okay";
 };
 
-- 
2.37.1