[PATCH 0/3] arm64: dts: ten64: updates for hwmon/thermal, mmc and gpio

[Mathew McBride]

This series implements some changes to the Ten64 DTS:
1. Add a thermal setpoints for the fan connected to the
emc2301 fan controller.
The values described here are intended for users of the Ten64
desktop enclosure and are rather conservative, it is expected
some facility to override them (e.g via device tree overlays)
will be provided in the firmware.

2. Reduce the maximum SD/MMC bus speed to improve stability
with some microSD cards

3. Add gpio-line-names for all GPIOs that have defined purposes
(both for system purposes and those routed to the expansion header)

Signed-off-by: Mathew McBride <matt at traverse.com.au>
---
Mathew McBride (3):
      arm64: dts: ten64: add emc2301 fan controller and thermal set points
      arm64: dts: ten64: reduce maximum SD card speed
      arm64: dts: ten64: provide gpio-line-names for all system gpios

 .../arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts | 111 +++++++++++++++++++++
 1 file changed, 111 insertions(+)
---
base-commit: 944aacb68baf7624ab8d277d0ebf07f025ca137c
change-id: 20251203-ten64-dts-updates-2025-12-ba306e21c0e1

Best regards,
-- 
Mathew McBride <matt at traverse.com.au>