[PATCH 3/6] arm64: dts: amlogic: axg: assign the MMC signal clocks

[Jerome Brunet]

The amlogic MMC driver operate with the assumption that MMC clock
is configured to provide 24MHz. It uses this path for low
rates such as 400kHz.

Assign the clocks to make sure they are properly configured

Fixes: 221cf34bac54 ("ARM64: dts: meson-axg: enable the eMMC controller")
Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index e95c91894968..cc72491eaf6f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -1960,6 +1960,9 @@ sd_emmc_b: mmc at 5000 {
 					<&clkc CLKID_FCLK_DIV2>;
 				clock-names = "core", "clkin0", "clkin1";
 				resets = <&reset RESET_SD_EMMC_B>;
+
+				assigned-clocks = <&clkc CLKID_SD_EMMC_B_CLK0>;
+				assigned-clock-rates = <24000000>;
 			};
 
 			sd_emmc_c: mmc at 7000 {
@@ -1972,6 +1975,9 @@ sd_emmc_c: mmc at 7000 {
 					<&clkc CLKID_FCLK_DIV2>;
 				clock-names = "core", "clkin0", "clkin1";
 				resets = <&reset RESET_SD_EMMC_C>;
+
+				assigned-clocks = <&clkc CLKID_SD_EMMC_C_CLK0>;
+				assigned-clock-rates = <24000000>;
 			};
 
 			nfc: nand-controller at 7800 {

-- 
2.47.3