[PATCH v2 0/2] arm64: dts: meson-s4: add support for Khadas VIM1S

[Nick Xie]

This series adds initial support for the Khadas VIM1S single board computer.

The Khadas VIM1S is based on the Amlogic S905Y4 (S4 family) SoC.
It features:
 - 2GB LPDDR4 RAM
 - 16GB eMMC 5.1 storage
 - 32MB SPI flash
 - 100 Base-T Ethernet
 - AP6256 Wireless (802.11 a/b/g/n/ac, BT5.0)
 - HDMI 2.1 video
 - 2x USB 2.0 ports
 - 1x USB-C (power) with USB 2.0 OTG
 - 2x LED's (1x red, 1x white)
 - 3x buttons (power, function, reset)
 - IR receiver
 - 40pin GPIO Header
 - 1x micro SD card slot

The first patch adds the devicetree binding, and the second patch adds
the board device tree.

Changes in v2:
- dts: fixed dtbs_check warning: removed unsupported 'enable-active-low' property
  from regulator-sd-3v3 node
- Link to v1: https://lore.kernel.org/linux-amlogic/20260113090951.35928-1-nick@khadas.com/

Nick Xie (2):
  dt-bindings: arm: amlogic: add Khadas VIM1S binding
  arm64: dts: add initial device-tree for Khadas VIM1S

 .../devicetree/bindings/arm/amlogic.yaml      |   6 +
 arch/arm64/boot/dts/amlogic/Makefile          |   1 +
 .../amlogic/meson-s4-s905y4-khadas-vim1s.dts  | 190 ++++++++++++++++++
 3 files changed, 197 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-s4-s905y4-khadas-vim1s.dts

-- 
2.34.1