[PATCH v4 4/4] drm/rockchip: vop2: Support setting custom background color

[Cristian Ciocaltea]

Hi Andy,

On 1/10/26 6:00 AM, Andy Yan wrote:
> 
> 
> Hello Cristian,
> At 2025-12-20 05:47:01, "Cristian Ciocaltea" <cristian.ciocaltea at collabora.com> wrote:
>> The Rockchip VOP2 display controller allows configuring the background
>> color of each video output port.
>>
>> Since a previous patch introduced the BACKGROUND_COLOR CRTC property,
>> which defaults to solid black, make use of it when programming the
>> hardware.
>>
>> Note the maximum precision allowed by the display controller is 10bpc,
>> while the alpha component is not supported, hence ignored.
>>
>> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>
>> ---
>> drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 13 ++++++++++++-
>> drivers/gpu/drm/rockchip/rockchip_drm_vop2.h |  4 ++++
>> 2 files changed, 16 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
>> index 498df0ce4680..3a232d0d4acb 100644
>> --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
>> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
>> @@ -1554,6 +1554,7 @@ static void vop2_post_config(struct drm_crtc *crtc)
>> 	struct vop2_video_port *vp = to_vop2_video_port(crtc);
>> 	struct vop2 *vop2 = vp->vop2;
>> 	struct drm_display_mode *mode = &crtc->state->adjusted_mode;
>> +	u64 bgcolor = crtc->state->background_color;
>> 	u16 vtotal = mode->crtc_vtotal;
>> 	u16 hdisplay = mode->crtc_hdisplay;
>> 	u16 hact_st = mode->crtc_htotal - mode->crtc_hsync_start;
>> @@ -1599,7 +1600,11 @@ static void vop2_post_config(struct drm_crtc *crtc)
>> 		vop2_vp_write(vp, RK3568_VP_POST_DSP_VACT_INFO_F1, val);
>> 	}
>>
>> -	vop2_vp_write(vp, RK3568_VP_DSP_BG, 0);
>> +	/* Background color is programmed with 10 bits of precision */
>> +	val = FIELD_PREP(RK3568_VP_DSP_BG__DSP_BG_RED, DRM_ARGB64_GETR(bgcolor) >> 6);
>> +	val |= FIELD_PREP(RK3568_VP_DSP_BG__DSP_BG_GREEN, DRM_ARGB64_GETG(bgcolor) >> 6);
> 
>> +	val |= FIELD_PREP(RK3568_VP_DSP_BG__DSP_BG_BLUE, DRM_ARGB64_GETB(bgcolor) >> 6);
> 
> 
> the bit31 of  RK3568_VP_DSP_BG  is bg_display_en， that means when we set a 
> background color, we should set this bg_display_en bit.

Oh yes, good catch!

> The default value of this bit is 1, which explains why the patch currently works 
> properly even though it doesn't set bit31.

For some reason, the RK3588 TRM indicates 0x0 for the reset value.  I assume
that's a mistake, as RK3576 TRM shows 0x1.

Thanks,
Cristian