[PATCH] Coding Style: Format arch/arm/boot/dts/xilinx
Michal Simek
michal.simek at amd.com
Tue Jan 6 03:54:04 PST 2026
Hi,
On 12/18/25 13:51, kylebonnici wrote:
> From: Kyle Bonnici <kylebonnici at hotmail.com>
>
> - Convert hex value to lowercase
> - align property values to ' = '
> - clean up whitespaces
> - fix indentation
> - add new line between nodes
>
> The changes are generated using the dts-linter.
>
> This is just a sample of what the above tool can fix and this change is
> intended to start the conversation on how I should suggest fixes to this repo
> Without sending one big PR.
>
> Also, this is my first attempt at such a submission. Hopefully I did not miss
> Anything fundamental in the submission process.
my issue is with subject. Where Coding Style: subsystem is not defined.
I tried your tool locally and I think handling in connection to long line should
be improved.
But in general I don't have a problem to use any tool to do coding style
formatting.
Newlines I don't really mind but lower case, additional spaces, tabs/spaces are
nicely visible.
I think you should get ack from Rob, Krzysztof and Conor to run it in bigger scale.
Thanks,
Michal
>
> Signed-off-by: Kyle Bonnici <kylebonnici at proton.me>
> ---
> arch/arm/boot/dts/xilinx/zynq-7000.dtsi | 72 +++++++++++--------
> arch/arm/boot/dts/xilinx/zynq-cc108.dts | 11 ++-
> arch/arm/boot/dts/xilinx/zynq-ebaz4205.dts | 1 +
> arch/arm/boot/dts/xilinx/zynq-parallella.dts | 7 +-
> arch/arm/boot/dts/xilinx/zynq-zc702.dts | 17 +++++
> arch/arm/boot/dts/xilinx/zynq-zc706.dts | 13 ++++
> arch/arm/boot/dts/xilinx/zynq-zc770-xm010.dts | 10 +++
> arch/arm/boot/dts/xilinx/zynq-zc770-xm011.dts | 5 ++
> arch/arm/boot/dts/xilinx/zynq-zc770-xm012.dts | 6 ++
> arch/arm/boot/dts/xilinx/zynq-zc770-xm013.dts | 8 +++
> arch/arm/boot/dts/xilinx/zynq-zed.dts | 7 ++
> .../boot/dts/xilinx/zynq-zturn-common.dtsi | 5 +-
> 12 files changed, 126 insertions(+), 36 deletions(-)
>
> diff --git a/arch/arm/boot/dts/xilinx/zynq-7000.dtsi b/arch/arm/boot/dts/xilinx/zynq-7000.dtsi
> index 153b8d93cbee..dd8a6528e8a7 100644
> --- a/arch/arm/boot/dts/xilinx/zynq-7000.dtsi
> +++ b/arch/arm/boot/dts/xilinx/zynq-7000.dtsi
> @@ -27,10 +27,9 @@ cpu0: cpu at 0 {
> clock-latency = <1000>;
> cpu0-supply = <®ulator_vccpint>;
> operating-points = <
> - /* kHz uV */
> - 666667 1000000
> - 333334 1000000
> - >;
> + /* kHz uV */
> + 666667 1000000
> + 333334 1000000>;
> };
>
> cpu1: cpu at 1 {
> @@ -78,17 +77,21 @@ out-ports {
> /* replicator output ports */
> port at 0 {
> reg = <0>;
> +
> replicator_out_port0: endpoint {
> remote-endpoint = <&tpiu_in_port>;
> };
> };
> +
> port at 1 {
> reg = <1>;
> +
> replicator_out_port1: endpoint {
> remote-endpoint = <&etb_in_port>;
> };
> };
> };
> +
> in-ports {
> /* replicator input port */
> port {
> @@ -179,13 +182,13 @@ intc: interrupt-controller at f8f01000 {
> compatible = "arm,cortex-a9-gic";
> #interrupt-cells = <3>;
> interrupt-controller;
> - reg = <0xF8F01000 0x1000>,
> - <0xF8F00100 0x100>;
> + reg = <0xf8f01000 0x1000>,
> + <0xf8f00100 0x100>;
> };
>
> L2: cache-controller at f8f02000 {
> compatible = "arm,pl310-cache";
> - reg = <0xF8F02000 0x1000>;
> + reg = <0xf8f02000 0x1000>;
> interrupts = <0 2 4>;
> arm,data-latency = <3 2 2>;
> arm,tag-latency = <2 2 2>;
> @@ -204,6 +207,7 @@ ocm: sram at fffc0000 {
> #address-cells = <1>;
> #size-cells = <1>;
> ranges = <0 0xfffc0000 0x10000>;
> +
> ocm-sram at 0 {
> reg = <0x0 0x10000>;
> };
> @@ -214,7 +218,7 @@ uart0: serial at e0000000 {
> status = "disabled";
> clocks = <&clkc 23>, <&clkc 40>;
> clock-names = "uart_clk", "pclk";
> - reg = <0xE0000000 0x1000>;
> + reg = <0xe0000000 0x1000>;
> interrupts = <0 27 4>;
> };
>
> @@ -223,7 +227,7 @@ uart1: serial at e0001000 {
> status = "disabled";
> clocks = <&clkc 24>, <&clkc 41>;
> clock-names = "uart_clk", "pclk";
> - reg = <0xE0001000 0x1000>;
> + reg = <0xe0001000 0x1000>;
> interrupts = <0 50 4>;
> };
>
> @@ -304,6 +308,7 @@ nfc0: nand-controller at 0,0 {
> reg = <0 0 0x1000000>;
> status = "disabled";
> };
> +
> nor0: flash at 1,0 {
> status = "disabled";
> compatible = "cfi-flash";
> @@ -336,24 +341,26 @@ slcr: slcr at f8000000 {
> #address-cells = <1>;
> #size-cells = <1>;
> compatible = "xlnx,zynq-slcr", "syscon", "simple-mfd";
> - reg = <0xF8000000 0x1000>;
> + reg = <0xf8000000 0x1000>;
> ranges;
> +
> clkc: clkc at 100 {
> bootph-all;
> #clock-cells = <1>;
> compatible = "xlnx,ps7-clkc";
> fclk-enable = <0>;
> clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
> - "cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
> - "dci", "lqspi", "smc", "pcap", "gem0", "gem1",
> - "fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
> - "sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1",
> - "dma", "usb0_aper", "usb1_aper", "gem0_aper",
> - "gem1_aper", "sdio0_aper", "sdio1_aper",
> - "spi0_aper", "spi1_aper", "can0_aper", "can1_aper",
> - "i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper",
> - "gpio_aper", "lqspi_aper", "smc_aper", "swdt",
> - "dbg_trc", "dbg_apb";
> + "cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x",
> + "ddr3x", "dci", "lqspi", "smc", "pcap", "gem0",
> + "gem1", "fclk0", "fclk1", "fclk2", "fclk3",
> + "can0", "can1", "sdio0", "sdio1", "uart0",
> + "uart1", "spi0", "spi1", "dma", "usb0_aper",
> + "usb1_aper", "gem0_aper", "gem1_aper",
> + "sdio0_aper", "sdio1_aper", "spi0_aper",
> + "spi1_aper", "can0_aper", "can1_aper",
> + "i2c0_aper", "i2c1_aper", "uart0_aper",
> + "uart1_aper", "gpio_aper", "lqspi_aper",
> + "smc_aper", "swdt", "dbg_trc", "dbg_apb";
> reg = <0x100 0x100>;
> };
>
> @@ -380,10 +387,10 @@ dmac_s: dma-controller at f8003000 {
> * "dma4", "dma5", "dma6", "dma7";
> */
> interrupts = <0 13 4>,
> - <0 14 4>, <0 15 4>,
> - <0 16 4>, <0 17 4>,
> - <0 40 4>, <0 41 4>,
> - <0 42 4>, <0 43 4>;
> + <0 14 4>, <0 15 4>,
> + <0 16 4>, <0 17 4>,
> + <0 40 4>, <0 41 4>,
> + <0 42 4>, <0 43 4>;
> #dma-cells = <1>;
> clocks = <&clkc 27>;
> clock-names = "apb_pclk";
> @@ -412,7 +419,7 @@ ttc0: timer at f8001000 {
> interrupts = <0 10 4>, <0 11 4>, <0 12 4>;
> compatible = "cdns,ttc";
> clocks = <&clkc 6>;
> - reg = <0xF8001000 0x1000>;
> + reg = <0xf8001000 0x1000>;
> };
>
> ttc1: timer at f8002000 {
> @@ -420,7 +427,7 @@ ttc1: timer at f8002000 {
> interrupts = <0 37 4>, <0 38 4>, <0 39 4>;
> compatible = "cdns,ttc";
> clocks = <&clkc 6>;
> - reg = <0xF8002000 0x1000>;
> + reg = <0xf8002000 0x1000>;
> };
>
> scutimer: timer at f8f00600 {
> @@ -466,6 +473,7 @@ etb at f8801000 {
> reg = <0xf8801000 0x1000>;
> clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
> clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
> +
> in-ports {
> port {
> etb_in_port: endpoint {
> @@ -480,6 +488,7 @@ tpiu at f8803000 {
> reg = <0xf8803000 0x1000>;
> clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
> clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
> +
> in-ports {
> port {
> tpiu_in_port: endpoint {
> @@ -499,8 +508,7 @@ funnel at f8804000 {
> out-ports {
> port {
> funnel_out_port: endpoint {
> - remote-endpoint =
> - <&replicator_in_port0>;
> + remote-endpoint = <&replicator_in_port0>;
> };
> };
> };
> @@ -512,6 +520,7 @@ in-ports {
> /* funnel input ports */
> port at 0 {
> reg = <0>;
> +
> funnel0_in_port0: endpoint {
> remote-endpoint = <&ptm0_out_port>;
> };
> @@ -519,6 +528,7 @@ funnel0_in_port0: endpoint {
>
> port at 1 {
> reg = <1>;
> +
> funnel0_in_port1: endpoint {
> remote-endpoint = <&ptm1_out_port>;
> };
> @@ -526,8 +536,8 @@ funnel0_in_port1: endpoint {
>
> port at 2 {
> reg = <2>;
> - funnel0_in_port2: endpoint {
> - };
> +
> + funnel0_in_port2: endpoint {};
> };
> /* The other input ports are not connect to anything */
> };
> @@ -539,6 +549,7 @@ ptm at f889c000 {
> clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
> clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
> cpu = <&cpu0>;
> +
> out-ports {
> port {
> ptm0_out_port: endpoint {
> @@ -554,6 +565,7 @@ ptm at f889d000 {
> clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
> clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
> cpu = <&cpu1>;
> +
> out-ports {
> port {
> ptm1_out_port: endpoint {
> diff --git a/arch/arm/boot/dts/xilinx/zynq-cc108.dts b/arch/arm/boot/dts/xilinx/zynq-cc108.dts
> index f5525c048426..25828ba9fa16 100644
> --- a/arch/arm/boot/dts/xilinx/zynq-cc108.dts
> +++ b/arch/arm/boot/dts/xilinx/zynq-cc108.dts
> @@ -55,6 +55,7 @@ ethernet_phy: ethernet-phy at 1 {
> &qspi {
> status = "okay";
> num-cs = <1>;
> +
> flash at 0 { /* 16 MB */
> compatible = "jedec,spi-nor";
> reg = <0x0>;
> @@ -63,26 +64,32 @@ flash at 0 { /* 16 MB */
> spi-rx-bus-width = <4>;
> #address-cells = <1>;
> #size-cells = <1>;
> +
> partition at 0 {
> label = "qspi-fsbl-uboot-bs";
> reg = <0x0 0x400000>; /* 4MB */
> };
> +
> partition at 400000 {
> label = "qspi-linux";
> reg = <0x400000 0x400000>; /* 4MB */
> };
> +
> partition at 800000 {
> label = "qspi-rootfs";
> reg = <0x800000 0x400000>; /* 4MB */
> };
> +
> partition at c00000 {
> label = "qspi-devicetree";
> reg = <0xc00000 0x100000>; /* 1MB */
> };
> +
> partition at d00000 {
> label = "qspi-scratch";
> reg = <0xd00000 0x200000>; /* 2MB */
> };
> +
> partition at f00000 {
> label = "qspi-uboot-env";
> reg = <0xf00000 0x100000>; /* 1MB */
> @@ -92,8 +99,8 @@ partition at f00000 {
>
> &sdhci1 {
> status = "okay";
> - broken-cd ;
> - wp-inverted ;
> + broken-cd;
> + wp-inverted;
> };
>
> &uart0 {
> diff --git a/arch/arm/boot/dts/xilinx/zynq-ebaz4205.dts b/arch/arm/boot/dts/xilinx/zynq-ebaz4205.dts
> index 14f644156a6f..d4c07d28ec25 100644
> --- a/arch/arm/boot/dts/xilinx/zynq-ebaz4205.dts
> +++ b/arch/arm/boot/dts/xilinx/zynq-ebaz4205.dts
> @@ -53,6 +53,7 @@ &nfc0 {
>
> #address-cells = <1>;
> #size-cells = <0>;
> +
> nand at 0 {
> reg = <0>;
> };
> diff --git a/arch/arm/boot/dts/xilinx/zynq-parallella.dts b/arch/arm/boot/dts/xilinx/zynq-parallella.dts
> index 366af4fcf8d9..e498feaa7ca4 100644
> --- a/arch/arm/boot/dts/xilinx/zynq-parallella.dts
> +++ b/arch/arm/boot/dts/xilinx/zynq-parallella.dts
> @@ -44,10 +44,10 @@ &gem0 {
> ethernet_phy: ethernet-phy at 0 {
> /* Marvell 88E1318 */
> compatible = "ethernet-phy-id0141.0e90",
> - "ethernet-phy-ieee802.3-c22";
> + "ethernet-phy-ieee802.3-c22";
> reg = <0>;
> marvell,reg-init = <0x3 0x10 0xff00 0x1e>,
> - <0x3 0x11 0xfff0 0xa>;
> + <0x3 0x11 0xfff0 0xa>;
> };
> };
>
> @@ -63,13 +63,16 @@ dcd1 {
> regulator-name = "VDD_DSP";
> regulator-always-on;
> };
> +
> dcd2 {
> regulator-name = "1P35V";
> regulator-always-on;
> };
> +
> ldo1 {
> regulator-name = "VDD_ADJ";
> };
> +
> ldo2 {
> regulator-name = "VDD_GPIO";
> regulator-always-on;
> diff --git a/arch/arm/boot/dts/xilinx/zynq-zc702.dts b/arch/arm/boot/dts/xilinx/zynq-zc702.dts
> index 6955637c5b1a..63eded827b37 100644
> --- a/arch/arm/boot/dts/xilinx/zynq-zc702.dts
> +++ b/arch/arm/boot/dts/xilinx/zynq-zc702.dts
> @@ -34,6 +34,7 @@ chosen {
> gpio-keys {
> compatible = "gpio-keys";
> autorepeat;
> +
> switch-14 {
> label = "sw14";
> gpios = <&gpio0 12 0>;
> @@ -41,6 +42,7 @@ switch-14 {
> wakeup-source;
> autorepeat;
> };
> +
> switch-13 {
> label = "sw13";
> gpios = <&gpio0 14 0>;
> @@ -112,6 +114,7 @@ i2c at 0 {
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0>;
> +
> si570: clock-generator at 5d {
> #clock-cells = <0>;
> compatible = "silabs,si570";
> @@ -126,6 +129,7 @@ i2c at 1 {
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <1>;
> +
> adv7511: hdmi-tx at 39 {
> compatible = "adi,adv7511";
> reg = <0x39>;
> @@ -141,6 +145,7 @@ i2c at 2 {
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <2>;
> +
> eeprom: eeprom at 54 {
> compatible = "atmel,24c08";
> reg = <0x54>;
> @@ -151,6 +156,7 @@ i2c at 3 {
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <3>;
> +
> gpio at 21 {
> compatible = "ti,tca6416";
> reg = <0x21>;
> @@ -163,6 +169,7 @@ i2c at 4 {
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <4>;
> +
> rtc: rtc at 51 {
> compatible = "nxp,pcf8563";
> reg = <0x51>;
> @@ -173,14 +180,17 @@ i2c at 7 {
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <7>;
> +
> hwmon at 34 {
> compatible = "ti,ucd9248";
> reg = <0x34>;
> };
> +
> hwmon at 35 {
> compatible = "ti,ucd9248";
> reg = <0x35>;
> };
> +
> hwmon at 36 {
> compatible = "ti,ucd9248";
> reg = <0x36>;
> @@ -396,32 +406,39 @@ &qspi {
> bootph-all;
> status = "okay";
> num-cs = <1>;
> +
> flash at 0 {
> compatible = "jedec,spi-nor";
> reg = <0x0>;
> spi-tx-bus-width = <1>;
> spi-rx-bus-width = <4>;
> spi-max-frequency = <50000000>;
> +
> partitions {
> compatible = "fixed-partitions";
> #address-cells = <1>;
> #size-cells = <1>;
> +
> partition at 0 {
> label = "qspi-fsbl-uboot";
> reg = <0x0 0x100000>;
> };
> +
> partition at 100000 {
> label = "qspi-linux";
> reg = <0x100000 0x500000>;
> };
> +
> partition at 600000 {
> label = "qspi-device-tree";
> reg = <0x600000 0x20000>;
> };
> +
> partition at 620000 {
> label = "qspi-rootfs";
> reg = <0x620000 0x5e0000>;
> };
> +
> partition at c00000 {
> label = "qspi-bitstream";
> reg = <0xc00000 0x400000>;
> diff --git a/arch/arm/boot/dts/xilinx/zynq-zc706.dts b/arch/arm/boot/dts/xilinx/zynq-zc706.dts
> index 3b803c698473..d6447e544d8f 100644
> --- a/arch/arm/boot/dts/xilinx/zynq-zc706.dts
> +++ b/arch/arm/boot/dts/xilinx/zynq-zc706.dts
> @@ -73,6 +73,7 @@ i2c at 0 {
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0>;
> +
> si570: clock-generator at 5d {
> #clock-cells = <0>;
> compatible = "silabs,si570";
> @@ -87,6 +88,7 @@ i2c at 1 {
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <1>;
> +
> adv7511: hdmi-tx at 39 {
> compatible = "adi,adv7511";
> reg = <0x39>;
> @@ -102,6 +104,7 @@ i2c at 2 {
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <2>;
> +
> eeprom: eeprom at 54 {
> compatible = "atmel,24c08";
> reg = <0x54>;
> @@ -112,6 +115,7 @@ i2c at 3 {
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <3>;
> +
> gpio at 21 {
> compatible = "ti,tca6416";
> reg = <0x21>;
> @@ -124,6 +128,7 @@ i2c at 4 {
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <4>;
> +
> rtc: rtc at 51 {
> compatible = "nxp,pcf8563";
> reg = <0x51>;
> @@ -134,6 +139,7 @@ i2c at 7 {
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <7>;
> +
> ucd90120 at 65 {
> compatible = "ti,ucd90120";
> reg = <0x65>;
> @@ -309,6 +315,7 @@ &qspi {
> bootph-all;
> status = "okay";
> num-cs = <2>;
> +
> flash at 0 {
> compatible = "jedec,spi-nor";
> reg = <0>, <1>;
> @@ -316,26 +323,32 @@ flash at 0 {
> spi-tx-bus-width = <1>;
> spi-rx-bus-width = <4>;
> spi-max-frequency = <50000000>;
> +
> partitions {
> compatible = "fixed-partitions";
> #address-cells = <1>;
> #size-cells = <1>;
> +
> partition at 0 {
> label = "qspi-fsbl-uboot";
> reg = <0x0 0x100000>;
> };
> +
> partition at 100000 {
> label = "qspi-linux";
> reg = <0x100000 0x500000>;
> };
> +
> partition at 600000 {
> label = "qspi-device-tree";
> reg = <0x600000 0x20000>;
> };
> +
> partition at 620000 {
> label = "qspi-rootfs";
> reg = <0x620000 0x5e0000>;
> };
> +
> partition at c00000 {
> label = "qspi-bitstream";
> reg = <0xc00000 0x400000>;
> diff --git a/arch/arm/boot/dts/xilinx/zynq-zc770-xm010.dts b/arch/arm/boot/dts/xilinx/zynq-zc770-xm010.dts
> index 5fe799c3c7cf..4929a5aa1678 100644
> --- a/arch/arm/boot/dts/xilinx/zynq-zc770-xm010.dts
> +++ b/arch/arm/boot/dts/xilinx/zynq-zc770-xm010.dts
> @@ -62,32 +62,39 @@ eeprom: eeprom at 52 {
> &qspi {
> status = "okay";
> num-cs = <1>;
> +
> flash at 0 {
> compatible = "jedec,spi-nor";
> reg = <0x0>;
> spi-tx-bus-width = <1>;
> spi-rx-bus-width = <4>;
> spi-max-frequency = <50000000>;
> +
> partitions {
> compatible = "fixed-partitions";
> #address-cells = <1>;
> #size-cells = <1>;
> +
> partition at 0 {
> label = "qspi-fsbl-uboot";
> reg = <0x0 0x100000>;
> };
> +
> partition at 100000 {
> label = "qspi-linux";
> reg = <0x100000 0x500000>;
> };
> +
> partition at 600000 {
> label = "qspi-device-tree";
> reg = <0x600000 0x20000>;
> };
> +
> partition at 620000 {
> label = "qspi-rootfs";
> reg = <0x620000 0x5e0000>;
> };
> +
> partition at c00000 {
> label = "qspi-bitstream";
> reg = <0xc00000 0x400000>;
> @@ -104,14 +111,17 @@ &spi1 {
> status = "okay";
> num-cs = <4>;
> is-decoded-cs = <0>;
> +
> flash at 1 {
> compatible = "sst25wf080", "jedec,spi-nor";
> reg = <1>;
> spi-max-frequency = <1000000>;
> +
> partitions {
> compatible = "fixed-partitions";
> #address-cells = <1>;
> #size-cells = <1>;
> +
> partition at 0 {
> label = "data";
> reg = <0x0 0x100000>;
> diff --git a/arch/arm/boot/dts/xilinx/zynq-zc770-xm011.dts b/arch/arm/boot/dts/xilinx/zynq-zc770-xm011.dts
> index f9a086fe66d3..d4e739772d7b 100644
> --- a/arch/arm/boot/dts/xilinx/zynq-zc770-xm011.dts
> +++ b/arch/arm/boot/dts/xilinx/zynq-zc770-xm011.dts
> @@ -51,20 +51,25 @@ &nfc0 {
> status = "okay";
> #address-cells = <1>;
> #size-cells = <0>;
> +
> nand at 0 {
> reg = <0>;
> +
> partitions {
> compatible = "fixed-partitions";
> #address-cells = <1>;
> #size-cells = <1>;
> +
> partition at 0 {
> label = "nand-fsbl-uboot";
> reg = <0x0 0x1000000>;
> };
> +
> partition at 1000000 {
> label = "nand-linux";
> reg = <0x1000000 0x2000000>;
> };
> +
> partition at 3000000 {
> label = "nand-rootfs";
> reg = <0x3000000 0x200000>;
> diff --git a/arch/arm/boot/dts/xilinx/zynq-zc770-xm012.dts b/arch/arm/boot/dts/xilinx/zynq-zc770-xm012.dts
> index 24520e7d3965..32422aed77a3 100644
> --- a/arch/arm/boot/dts/xilinx/zynq-zc770-xm012.dts
> +++ b/arch/arm/boot/dts/xilinx/zynq-zc770-xm012.dts
> @@ -56,26 +56,32 @@ eeprom1: eeprom at 52 {
> &nor0 {
> status = "okay";
> bank-width = <1>;
> +
> partitions {
> compatible = "fixed-partitions";
> #address-cells = <1>;
> #size-cells = <1>;
> +
> partition at 0 {
> label = "nor-fsbl-uboot";
> reg = <0x0 0x100000>;
> };
> +
> partition at 100000 {
> label = "nor-linux";
> reg = <0x100000 0x500000>;
> };
> +
> partition at 600000 {
> label = "nor-device-tree";
> reg = <0x600000 0x20000>;
> };
> +
> partition at 620000 {
> label = "nor-rootfs";
> reg = <0x620000 0x5e0000>;
> };
> +
> partition at c00000 {
> label = "nor-bitstream";
> reg = <0xc00000 0x400000>;
> diff --git a/arch/arm/boot/dts/xilinx/zynq-zc770-xm013.dts b/arch/arm/boot/dts/xilinx/zynq-zc770-xm013.dts
> index 103e87ea7253..9c94421bf650 100644
> --- a/arch/arm/boot/dts/xilinx/zynq-zc770-xm013.dts
> +++ b/arch/arm/boot/dts/xilinx/zynq-zc770-xm013.dts
> @@ -61,6 +61,7 @@ si570: clock-generator at 55 {
> &qspi {
> status = "okay";
> num-cs = <2>;
> +
> flash at 0 {
> compatible = "jedec,spi-nor";
> reg = <0>, <1>;
> @@ -68,26 +69,32 @@ flash at 0 {
> spi-tx-bus-width = <1>;
> spi-rx-bus-width = <4>;
> spi-max-frequency = <50000000>;
> +
> partitions {
> compatible = "fixed-partitions";
> #address-cells = <1>;
> #size-cells = <1>;
> +
> partition at 0 {
> label = "qspi-fsbl-uboot";
> reg = <0x0 0x100000>;
> };
> +
> partition at 100000 {
> label = "qspi-linux";
> reg = <0x100000 0x500000>;
> };
> +
> partition at 600000 {
> label = "qspi-device-tree";
> reg = <0x600000 0x20000>;
> };
> +
> partition at 620000 {
> label = "qspi-rootfs";
> reg = <0x620000 0x5e0000>;
> };
> +
> partition at c00000 {
> label = "qspi-bitstream";
> reg = <0xc00000 0x400000>;
> @@ -100,6 +107,7 @@ &spi0 {
> status = "okay";
> num-cs = <4>;
> is-decoded-cs = <0>;
> +
> eeprom: eeprom at 2 {
> compatible = "atmel,at25";
> reg = <2>;
> diff --git a/arch/arm/boot/dts/xilinx/zynq-zed.dts b/arch/arm/boot/dts/xilinx/zynq-zed.dts
> index 52ba569b2b9f..dd46d71e3f36 100644
> --- a/arch/arm/boot/dts/xilinx/zynq-zed.dts
> +++ b/arch/arm/boot/dts/xilinx/zynq-zed.dts
> @@ -51,6 +51,7 @@ &qspi {
> bootph-all;
> status = "okay";
> num-cs = <1>;
> +
> flash at 0 {
> compatible = "jedec,spi-nor";
> reg = <0>;
> @@ -58,26 +59,32 @@ flash at 0 {
> spi-rx-bus-width = <4>;
> spi-max-frequency = <50000000>;
> m25p,fast-read;
> +
> partitions {
> compatible = "fixed-partitions";
> #address-cells = <1>;
> #size-cells = <1>;
> +
> partition at 0 {
> label = "qspi-fsbl-uboot";
> reg = <0x0 0x100000>;
> };
> +
> partition at 100000 {
> label = "qspi-linux";
> reg = <0x100000 0x500000>;
> };
> +
> partition at 600000 {
> label = "qspi-device-tree";
> reg = <0x600000 0x20000>;
> };
> +
> partition at 620000 {
> label = "qspi-rootfs";
> reg = <0x620000 0x5e0000>;
> };
> +
> partition at c00000 {
> label = "qspi-bitstream";
> reg = <0xc00000 0x400000>;
> diff --git a/arch/arm/boot/dts/xilinx/zynq-zturn-common.dtsi b/arch/arm/boot/dts/xilinx/zynq-zturn-common.dtsi
> index defef9c8da13..57e6cda1a798 100644
> --- a/arch/arm/boot/dts/xilinx/zynq-zturn-common.dtsi
> +++ b/arch/arm/boot/dts/xilinx/zynq-zturn-common.dtsi
> @@ -33,6 +33,7 @@ chosen {
>
> gpio-leds {
> compatible = "gpio-leds";
> +
> usr-led1 {
> label = "usr-led1";
> gpios = <&gpio0 0x0 0x1>;
> @@ -49,6 +50,7 @@ usr-led2 {
> gpio-keys {
> compatible = "gpio-keys";
> autorepeat;
> +
> key {
> label = "K1";
> gpios = <&gpio0 0x32 0x1>;
> @@ -73,8 +75,7 @@ &gem0 {
> phy-mode = "rgmii-id";
> phy-handle = <ðernet_phy>;
>
> - ethernet_phy: ethernet-phy at 0 {
> - };
> + ethernet_phy: ethernet-phy at 0 {};
> };
>
> &sdhci0 {
More information about the linux-arm-kernel
mailing list