[PATCH] arm64: dts: xilinx: Drop "label" property on dlg,slg7xl45106

[Michal Simek]

On 12/16/25 18:59, Rob Herring (Arm) wrote:
> The "label" property is not documented for the dlg,slg7xl45106. Nor is
> it common to use for GPIO controllers. So drop it.
> 
> Signed-off-by: Rob Herring (Arm) <robh at kernel.org>
> ---
>   arch/arm64/boot/dts/xilinx/zynqmp-sck-kd-g-revA.dtso | 1 -
>   arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revA.dtso | 1 -
>   arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revB.dtso | 1 -
>   3 files changed, 3 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kd-g-revA.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kd-g-revA.dtso
> index 02be5e1e8686..d0230da47068 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kd-g-revA.dtso
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kd-g-revA.dtso
> @@ -75,7 +75,6 @@ u3: ina260 at 40 { /* u3 */
>   	slg7xl45106: gpio at 11 { /* u13 - reset logic */
>   		compatible = "dlg,slg7xl45106";
>   		reg = <0x11>;
> -		label = "resetchip";
>   		gpio-controller;
>   		#gpio-cells = <2>;
>   		gpio-line-names = "USB0_PHY_RESET_B", "",
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revA.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revA.dtso
> index b92dcb86e87e..5d1f031bbd89 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revA.dtso
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revA.dtso
> @@ -103,7 +103,6 @@ u14: ina260 at 40 { /* u14 */
>   	slg7xl45106: gpio at 11 { /* u19 - reset logic */
>   		compatible = "dlg,slg7xl45106";
>   		reg = <0x11>;
> -		label = "resetchip";
>   		gpio-controller;
>   		#gpio-cells = <2>;
>   		gpio-line-names = "USB0_PHY_RESET_B", "USB1_PHY_RESET_B",
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revB.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revB.dtso
> index 99ad220d13d6..1d5c95bd6073 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revB.dtso
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revB.dtso
> @@ -104,7 +104,6 @@ u14: ina260 at 40 { /* u14 */
>   	slg7xl45106: gpio at 11 { /* u19 - reset logic */
>   		compatible = "dlg,slg7xl45106";
>   		reg = <0x11>;
> -		label = "resetchip";
>   		gpio-controller;
>   		#gpio-cells = <2>;
>   		gpio-line-names = "USB0_PHY_RESET_B", "USB1_PHY_RESET_B",

Applied.
M