[PATCH 3/3] arm64: boot: dts: ti: k3-am62l3-evm: enable WKUP UART wakeup from LPM

[Nishanth Menon]

On 20:51-20251230, Kendall Willis wrote:
> Change the status of the wkup_uart0_interconnect node to enabled. The
> target-module node sets the UART SYSC and SYSS registers to allow wakeup
> from WKUP UART in DeepSleep low power mode.
> 
> Signed-off-by: Kendall Willis <k-willis at ti.com>
> ---
>  arch/arm64/boot/dts/ti/k3-am62l3-evm.dts | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts b/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts
> index cae04cce337366b50928d39b0c888550b14e43d3..02b1a1c76b2ee05d49cd69d199a6aacdb1973fa0 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts
> @@ -359,3 +359,7 @@ &usb1 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&usb1_default_pins>;
>  };
> +
> +&wkup_uart0_interconnect {
> +	status = "okay";
> +};

don't we need to set status okay and provide pinmux for wkup_uart?

> 
> -- 
> 2.34.1
> 

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D
https://ti.com/opensource