[PATCH 3/5] arm64: dts: rockchip: Move copy-key to TSx33 board files

[Heiko Stuebner]

The copy-key is not present on all device variants, so move it to
the individual boards that have this key.

Signed-off-by: Heiko Stuebner <heiko at sntech.de>
---
 arch/arm64/boot/dts/rockchip/rk3568-qnap-ts233.dts  | 11 +++++++++++
 arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts  | 11 +++++++++++
 arch/arm64/boot/dts/rockchip/rk3568-qnap-tsx33.dtsi | 10 ++--------
 3 files changed, 24 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts233.dts b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts233.dts
index e76502180788..52b741376ef5 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts233.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts233.dts
@@ -51,6 +51,17 @@ eeprom at 56 {
 	};
 };
 
+&keys {
+		pinctrl-names = "default";
+		pinctrl-0 = <&copy_button_pin>, <&reset_button_pin>;
+
+		key-copy {
+			label = "copy";
+			gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_COPY>;
+		};
+};
+
 &leds {
 	led-1 {
 		color = <LED_COLOR_ID_GREEN>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
index 708e7f1f8d0d..7d2aedfe616d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
@@ -61,6 +61,17 @@ eeprom at 56 {
 	};
 };
 
+&keys {
+		pinctrl-names = "default";
+		pinctrl-0 = <&copy_button_pin>, <&reset_button_pin>;
+
+		key-copy {
+			label = "copy";
+			gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_COPY>;
+		};
+};
+
 &leds {
 	led-1 {
 		color = <LED_COLOR_ID_GREEN>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-qnap-tsx33.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-qnap-tsx33.dtsi
index 482d8584ec88..cca7b7d0685f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-qnap-tsx33.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3568-qnap-tsx33.dtsi
@@ -12,17 +12,11 @@ chosen {
 		stdout-path = "serial2:115200n8";
 	};
 
-	keys {
+	keys: keys {
 		compatible = "gpio-keys";
-		pinctrl-0 = <&copy_button_pin>, <&reset_button_pin>;
+		pinctrl-0 = <&reset_button_pin>;
 		pinctrl-names = "default";
 
-		key-copy {
-			label = "copy";
-			gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_COPY>;
-		};
-
 		key-reset {
 			label = "reset";
 			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_LOW>;
-- 
2.47.2