[PATCH] ARM: dts: helios4: add #phy-cells to USB nop phys

[Rosen Penev]

The usb-nop-xceiv binding requires a #phy-cells property; without it
dtbs_check reports:

  usb2-phy: '#phy-cells' is a required property (usb-nop-xceiv)
  usb3-phy: '#phy-cells' is a required property (usb-nop-xceiv)

Add #phy-cells = <0> to both nodes. No functional change.

Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp at gmail.com>
---
 arch/arm/boot/dts/marvell/armada-388-helios4.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/marvell/armada-388-helios4.dts b/arch/arm/boot/dts/marvell/armada-388-helios4.dts
index e63b8b5e632d..548fb92ca811 100644
--- a/arch/arm/boot/dts/marvell/armada-388-helios4.dts
+++ b/arch/arm/boot/dts/marvell/armada-388-helios4.dts
@@ -141,10 +141,12 @@ fan2: j17-pwm {
 	usb2_phy: usb2-phy {
 		compatible = "usb-nop-xceiv";
 		vbus-supply = <&reg_5p0v_usb>;
+		#phy-cells = <0>;
 	};
 
 	usb3_phy: usb3-phy {
 		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
 	};
 
 	soc {
-- 
2.55.0