[PATCH v3 0/2] arm64: dts: qcom: qcs6490-rubikpi3: Add IMX219 camera overlays

[Bjorn Andersson]

On Wed, 12 Aug 2026 10:22:37 +0800, Hongyang Zhao wrote:
> RUBIK Pi 3 provides two camera connectors but ships without camera
> modules, and each connector can be used with different sensors. Describe
> only the board-level 3.3 V output rail in the base DTS and add optional,
> per-connector overlays for Raspberry Pi Camera Module V2 IMX219 sensors.
> 
> CAM1 is connected to CCI1 and CSIPHY1, while CAM2 is connected to CCI0
> and CSIPHY4. The overlays can be used independently or combined, and the
> Makefile provides composed DTBs for both single-camera configurations and
> the dual-IMX219 configuration.
> 
> [...]

Applied, thanks!

[1/2] arm64: dts: qcom: qcs6490-rubikpi3: Add 3.3 V output supply
      commit: 4e40ef9973f7807599c86e390502f078cebeda37
[2/2] arm64: dts: qcom: qcs6490-rubikpi3: Add IMX219 camera overlays
      commit: f3b8fb4fbe7bb040df6d6e21e19dfa72f7d8ccc3

Best regards,
-- 
Bjorn Andersson <andersson at kernel.org>