[PATCH v3 2/2] dt-bindings: mfd: ti,keystone-devctrl: Convert to DT schema

[Bhargav Joshi]

Convert the Texas Instruments Keystone Device State Control binding from
legacy text format to DT schema.

During the conversion, the following updates were made:
- Add "simple-mfd" to compatibles matching existing dts usage.
- Add required bus properties #address-cells, #size-cells, and ranges
  which were missing in text binding.
- Document child nodes gpio, interrupt-controller, and reset-controller.

Signed-off-by: Bhargav Joshi <j.bhargav.u at gmail.com>
---
 .../bindings/mfd/ti,keystone-devctrl.yaml          | 84 ++++++++++++++++++++++
 .../bindings/mfd/ti-keystone-devctrl.txt           | 19 -----
 2 files changed, 84 insertions(+), 19 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/ti,keystone-devctrl.yaml b/Documentation/devicetree/bindings/mfd/ti,keystone-devctrl.yaml
new file mode 100644
index 000000000000..dd73b62357ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti,keystone-devctrl.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,keystone-devctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments Keystone Device State Control
+
+maintainers:
+  - Ivan Khoronzhuk <ivan.khoronzhuk at ti.com>
+
+description:
+  The Keystone II devices have a set of registers that are used to control the
+  status of its peripherals. This node is intended to allow access to this
+  functionality.
+
+properties:
+  compatible:
+    items:
+      - const: ti,keystone-devctrl
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^gpio@[0-9a-f]+$":
+    type: object
+    description: Keystone DSP GPIO controller
+
+  "^interrupt-controller@[0-9a-f]+$":
+    type: object
+    description: Keystone DSP to ARM interrupt controller
+
+  "^reset-controller@[0-9a-f]+$":
+    type: object
+    description: Keystone reset controller
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    device-state-control at 2620000 {
+        compatible = "ti,keystone-devctrl", "syscon", "simple-mfd";
+        reg = <0x02620000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x02620000 0x1000>;
+
+        interrupt-controller at 2a0 {
+            compatible = "ti,keystone-irq";
+            reg = <0x2a0 0x4>;
+            interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
+            interrupt-controller;
+            #interrupt-cells = <1>;
+            ti,syscon-dev = <&devctrl 0x2a0>;
+        };
+
+        reset-controller at 328 {
+            compatible = "ti,keystone-reset";
+            reg = <0x328 0x10>;
+            ti,syscon-pll = <&pllctrl 0xe4>;
+            ti,syscon-dev = <&devctrl 0x328>;
+            ti,wdt-list = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt b/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt
deleted file mode 100644
index 71a1f5963936..000000000000
--- a/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-* Device tree bindings for Texas Instruments keystone device state control
-
-The Keystone II devices have a set of registers that are used to control
-the status of its peripherals. This node is intended to allow access to
-this functionality.
-
-Required properties:
-
-- compatible:		"ti,keystone-devctrl", "syscon"
-
-- reg:			contains offset/length value for device state control
-			registers space.
-
-Example:
-
-devctrl: device-state-control at 02620000 {
-	compatible = "ti,keystone-devctrl", "syscon";
-	reg = <0x02620000 0x1000>;
-};

-- 
2.55.0