[PATCH v3 7/9] ALSA: pcm_dmaengine: Use dma_slave_caps bus width helpers

[Nuno Sá]

Use the dma_slave_caps bus width helpers instead of reading the legacy
src_addr_widths and dst_addr_widths masks directly.

Keep the existing default assumption of 1, 2 and 4 byte widths when the
DMA channel does not report slave capabilities.

Reviewed-by: Frank Li <Frank.Li at nxp.com>
Signed-off-by: Nuno Sá <nuno.sa at analog.com>
---
 sound/core/pcm_dmaengine.c | 21 +++++++++++++++------
 1 file changed, 15 insertions(+), 6 deletions(-)

diff --git a/sound/core/pcm_dmaengine.c b/sound/core/pcm_dmaengine.c
index 1306b04be171..2dbbdeae6c4c 100644
--- a/sound/core/pcm_dmaengine.c
+++ b/sound/core/pcm_dmaengine.c
@@ -11,6 +11,7 @@
  */
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/dma/engine/widthmask.h>
 #include <linux/dmaengine.h>
 #include <linux/slab.h>
 #include <sound/pcm.h>
@@ -408,16 +409,24 @@ int snd_dmaengine_pcm_refine_runtime_hwparams(
 	struct snd_pcm_hardware *hw,
 	struct dma_chan *chan)
 {
+	enum dma_slave_buswidth default_widths[] = {
+		DMA_SLAVE_BUSWIDTH_1_BYTE,
+		DMA_SLAVE_BUSWIDTH_2_BYTES,
+		DMA_SLAVE_BUSWIDTH_4_BYTES,
+	};
 	struct dma_slave_caps dma_caps;
-	u32 addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
-			  BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
-			  BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
+	dma_buswidth_mask_t bus_widths = {};
 	snd_pcm_format_t i;
 	int ret = 0;
 
 	if (!hw || !chan || !dma_data)
 		return -EINVAL;
 
+	ret = dma_bus_width_set_many(bus_widths, default_widths,
+				     ARRAY_SIZE(default_widths));
+	if (ret)
+		return ret;
+
 	ret = dma_get_slave_caps(chan, &dma_caps);
 	if (ret == 0) {
 		if (dma_caps.cmd_pause && dma_caps.cmd_resume)
@@ -426,9 +435,9 @@ int snd_dmaengine_pcm_refine_runtime_hwparams(
 			hw->info |= SNDRV_PCM_INFO_BATCH;
 
 		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-			addr_widths = dma_caps.dst_addr_widths;
+			dma_bus_width_copy(bus_widths, dma_caps.dst_bus_widths);
 		else
-			addr_widths = dma_caps.src_addr_widths;
+			dma_bus_width_copy(bus_widths, dma_caps.src_bus_widths);
 	}
 
 	/*
@@ -460,7 +469,7 @@ int snd_dmaengine_pcm_refine_runtime_hwparams(
 			case 24:
 			case 32:
 			case 64:
-				if (addr_widths & (1 << (bits / 8)))
+				if (dma_bus_width_test(bus_widths, bits / 8))
 					hw->formats |= pcm_format_to_bits(i);
 				break;
 			default:

-- 
2.55.0