[PATCH v4 2/2] ARM: dts: aspeed: Add ASRock Rack B650D4U BMC

[Prasanth Kumar Padarthi]

Add the device tree for the ASRock Rack B650D4U BMC, which is
based on the ASPEED AST2600 SoC.

Describe the BMC memory, SPI NOR flash layout, UART console, and
MAC0 connected to an RTL8211F Ethernet PHY.

The MAC0 RGMII RX delay configuration was validated on hardware.
The RTL8211F requires its internal RX delay for reliable operation,
while an additional TX delay is not required.

Signed-off-by: Prasanth Kumar Padarthi <prasanth.padarthi10 at gmail.com>
---
 arch/arm/boot/dts/aspeed/Makefile             |  1 +
 .../dts/aspeed/aspeed-bmc-asrock-b650d4u.dts  | 95 +++++++++++++++++++
 2 files changed, 96 insertions(+)
 create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-b650d4u.dts

diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index 6b68671f9379..b109491d5c8f 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-ampere-mtmitchell.dtb \
 	aspeed-bmc-arm-stardragon4800-rep2.dtb \
 	aspeed-bmc-asrock-altrad8.dtb \
+	aspeed-bmc-asrock-b650d4u.dtb \
 	aspeed-bmc-asrock-e3c246d4i.dtb \
 	aspeed-bmc-asrock-e3c256d4i.dtb \
 	aspeed-bmc-asrock-paul-ipmi-card.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-b650d4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-b650d4u.dts
new file mode 100644
index 000000000000..aa623f0ca36c
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-b650d4u.dts
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+
+/ {
+	model = "ASRock Rack B650D4U BMC";
+	compatible = "asrock,b650d4u-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory at 80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&fmc {
+	status = "okay";
+
+	flash at 0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		status = "okay";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			u-boot at 0 {
+				reg = <0x00000000 0x000e0000>;
+				label = "u-boot";
+				read-only;
+			};
+
+			u-boot-env at e0000 {
+				reg = <0x000e0000 0x00020000>;
+				label = "u-boot-env";
+			};
+
+			kernel at 200000 {
+				reg = <0x00200000 0x00800000>;
+				label = "kernel";
+			};
+
+			rofs at a00000 {
+				reg = <0x00a00000 0x02000000>;
+				label = "rofs";
+				read-only;
+			};
+
+			rwfs at 2a00000 {
+				reg = <0x02a00000 0x01600000>;
+				label = "rwfs";
+			};
+		};
+	};
+};
+
+&mac0 {
+	status = "okay";
+
+	/*
+	 * The RTL8211F provides the required RGMII RX delay. No additional
+	 * TX delay is required for this board.
+	 */
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&ethphy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default>;
+};
+
+&mdio0 {
+	status = "okay";
+
+	ethphy0: ethernet-phy at 0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
-- 
2.47.3