[PATCH] ARM: dts: marvell: Replace spaces indentation with tabs
Krzysztof Kozlowski
krzysztof.kozlowski at oss.qualcomm.com
Sat Aug 29 12:40:44 PDT 2026
Replace excessive spaces for aligning indentation into tabs. This will
be reported by dt-style-check ("[mixed-indent-chars] too many space
characters in indent (more than 7)").
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at oss.qualcomm.com>
---
arch/arm/boot/dts/marvell/dove.dtsi | 22 +++++++++----------
arch/arm/boot/dts/marvell/kirkwood-6282.dtsi | 15 ++++++-------
.../marvell/kirkwood-guruplug-server-plus.dts | 4 ++--
arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi | 4 ++--
.../boot/dts/marvell/kirkwood-synology.dtsi | 12 +++++-----
.../dts/marvell/orion5x-rd88f5182-nas.dts | 2 +-
6 files changed, 29 insertions(+), 30 deletions(-)
diff --git a/arch/arm/boot/dts/marvell/dove.dtsi b/arch/arm/boot/dts/marvell/dove.dtsi
index 062c86361640..75e2f9baf661 100644
--- a/arch/arm/boot/dts/marvell/dove.dtsi
+++ b/arch/arm/boot/dts/marvell/dove.dtsi
@@ -100,12 +100,12 @@ pcie: pcie {
msi-parent = <&intc>;
bus-range = <0x00 0xff>;
- ranges = <0x82000000 0x0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x2000
- 0x82000000 0x0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x2000
- 0x82000000 0x1 0x0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 Mem */
- 0x81000000 0x1 0x0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 I/O */
- 0x82000000 0x2 0x0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 Mem */
- 0x81000000 0x2 0x0 MBUS_ID(0x08, 0xe0) 0 1 0>; /* Port 1.0 I/O */
+ ranges = <0x82000000 0x0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x2000>,
+ <0x82000000 0x0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x2000>,
+ <0x82000000 0x1 0x0 MBUS_ID(0x04, 0xe8) 0 1 0>, /* Port 0.0 Mem */
+ <0x81000000 0x1 0x0 MBUS_ID(0x04, 0xe0) 0 1 0>, /* Port 0.0 I/O */
+ <0x82000000 0x2 0x0 MBUS_ID(0x08, 0xe8) 0 1 0>, /* Port 1.0 Mem */
+ <0x81000000 0x2 0x0 MBUS_ID(0x08, 0xe0) 0 1 0>; /* Port 1.0 I/O */
pcie0: pcie at 1 {
device_type = "pci";
@@ -117,8 +117,8 @@ pcie0: pcie at 1 {
#address-cells = <3>;
#size-cells = <2>;
- ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
- 0x81000000 0 0 0x81000000 0x1 0 1 0>;
+ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0>,
+ <0x81000000 0 0 0x81000000 0x1 0 1 0>;
bus-range = <0x00 0xff>;
#interrupt-cells = <1>;
@@ -146,8 +146,8 @@ pcie1: pcie at 2 {
#address-cells = <3>;
#size-cells = <2>;
- ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
- 0x81000000 0 0 0x81000000 0x2 0 1 0>;
+ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0>,
+ <0x81000000 0 0 0x81000000 0x2 0 1 0>;
bus-range = <0x00 0xff>;
#interrupt-cells = <1>;
@@ -772,7 +772,7 @@ rtc: real-time-clock at 8500 {
gconf: global-config at e802c {
compatible = "marvell,dove-global-config",
- "syscon";
+ "syscon";
reg = <0xe802c 0x14>;
};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-6282.dtsi b/arch/arm/boot/dts/marvell/kirkwood-6282.dtsi
index e33723160ce7..9f63e3f9eb1c 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-6282.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-6282.dtsi
@@ -11,14 +11,13 @@ pciec: pcie at 82000000 {
bus-range = <0x00 0xff>;
- ranges =
- <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
- 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
- 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
- 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
- 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
- 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1.0 MEM */
- 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1.0 IO */>;
+ ranges = <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000>,
+ <0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000>,
+ <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000>,
+ <0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */>,
+ <0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>,
+ <0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1.0 MEM */>,
+ <0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1.0 IO */>;
pcie0: pcie at 1,0 {
device_type = "pci";
diff --git a/arch/arm/boot/dts/marvell/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/marvell/kirkwood-guruplug-server-plus.dts
index d5aa8b505cc0..cc88d5324983 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-guruplug-server-plus.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-guruplug-server-plus.dts
@@ -104,14 +104,14 @@ &mdio {
ethphy0: ethernet-phy at 0 {
/* Marvell 88E1121R */
compatible = "ethernet-phy-id0141.0cb0",
- "ethernet-phy-ieee802.3-c22";
+ "ethernet-phy-ieee802.3-c22";
reg = <0>;
};
ethphy1: ethernet-phy at 1 {
/* Marvell 88E1121R */
compatible = "ethernet-phy-id0141.0cb0",
- "ethernet-phy-ieee802.3-c22";
+ "ethernet-phy-ieee802.3-c22";
reg = <1>;
};
};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi
index 5e0b139dd4fb..4206529b4a52 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi
@@ -168,8 +168,8 @@ gpio_fan {
compatible = "gpio-fan";
pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
pinctrl-names = "default";
- gpios = <&gpio0 19 GPIO_ACTIVE_LOW
- &gpio0 18 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>,
+ <&gpio0 18 GPIO_ACTIVE_LOW>;
gpio-fan,speed-map =
<0 3>,
<1500 2>,
diff --git a/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi b/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi
index 6b7c5218b1fb..de34bc2446ed 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi
@@ -281,7 +281,7 @@ gpio-fan-150-32-35 {
status = "disabled";
compatible = "gpio-fan";
pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34
- &pmx_fanalarm_35>;
+ &pmx_fanalarm_35>;
pinctrl-names = "default";
gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
&gpio1 1 GPIO_ACTIVE_HIGH
@@ -301,7 +301,7 @@ gpio-fan-150-15-18 {
status = "disabled";
compatible = "gpio-fan";
pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
- &pmx_fanalarm_18>;
+ &pmx_fanalarm_18>;
pinctrl-names = "default";
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
&gpio0 16 GPIO_ACTIVE_HIGH
@@ -322,7 +322,7 @@ gpio-fan-100-32-35 {
status = "disabled";
compatible = "gpio-fan";
pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34
- &pmx_fanalarm_35>;
+ &pmx_fanalarm_35>;
pinctrl-names = "default";
gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
&gpio1 1 GPIO_ACTIVE_HIGH
@@ -343,7 +343,7 @@ gpio-fan-100-15-18 {
status = "disabled";
compatible = "gpio-fan";
pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
- &pmx_fanalarm_18>;
+ &pmx_fanalarm_18>;
pinctrl-names = "default";
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
&gpio0 16 GPIO_ACTIVE_HIGH
@@ -364,7 +364,7 @@ gpio-fan-100-15-35-1 {
status = "disabled";
compatible = "gpio-fan";
pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
- &pmx_fanalarm_35>;
+ &pmx_fanalarm_35>;
pinctrl-names = "default";
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
&gpio0 16 GPIO_ACTIVE_HIGH
@@ -385,7 +385,7 @@ gpio-fan-100-15-35-3 {
status = "disabled";
compatible = "gpio-fan";
pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
- &pmx_fanalarm_35 &pmx_fanalarm_44 &pmx_fanalarm_45>;
+ &pmx_fanalarm_35 &pmx_fanalarm_44 &pmx_fanalarm_45>;
pinctrl-names = "default";
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
&gpio0 16 GPIO_ACTIVE_HIGH
diff --git a/arch/arm/boot/dts/marvell/orion5x-rd88f5182-nas.dts b/arch/arm/boot/dts/marvell/orion5x-rd88f5182-nas.dts
index 75ab913b21e5..1d803d1d1112 100644
--- a/arch/arm/boot/dts/marvell/orion5x-rd88f5182-nas.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-rd88f5182-nas.dts
@@ -22,7 +22,7 @@ chosen {
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
- <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+ <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
<MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x80000>,
<MBUS_ID(0x01, 0x1d) 0 0xfc000000 0x1000000>;
};
--
2.53.0
More information about the linux-arm-kernel
mailing list