[PATCH 5/7] arm64: dts: rockchip: Sort usb nodes on NanoPC-T6

[Diederik de Haas]

Nodes shall be ordered alpha-numerically by the node name.

Signed-off-by: Diederik de Haas <diederik at cknow-tech.com>
---
 .../boot/dts/rockchip/rk3588-nanopc-t6.dtsi   | 72 +++++++++----------
 1 file changed, 36 insertions(+), 36 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
index 2c9390d2968c..e42b2a14fc82 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
@@ -1164,12 +1164,6 @@ &tsadc {
 	status = "okay";
 };
 
-&uart2 {
-	pinctrl-0 = <&uart2m0_xfer>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
 &u2phy0 {
 	status = "okay";
 };
@@ -1186,15 +1180,11 @@ &u2phy1_otg {
 	status = "okay";
 };
 
-&u2phy2_host {
-	status = "okay";
-};
-
-&u2phy3_host {
+&u2phy2 {
 	status = "okay";
 };
 
-&u2phy2 {
+&u2phy2_host {
 	status = "okay";
 };
 
@@ -1202,31 +1192,13 @@ &u2phy3 {
 	status = "okay";
 };
 
-&usbdp_phy0 {
-	mode-switch;
-	orientation-switch;
-	sbu1-dc-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
-	sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
+&u2phy3_host {
 	status = "okay";
-
-	port {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usbdp_phy0_typec_ss: endpoint at 0 {
-			reg = <0>;
-			remote-endpoint = <&usbc0_ss>;
-		};
-
-		usbdp_phy0_typec_sbu: endpoint at 1 {
-			reg = <1>;
-			remote-endpoint = <&usbc0_sbu>;
-		};
-	};
 };
 
-&usbdp_phy1 {
-	phy-supply = <&vbus5v0_usb>;
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	pinctrl-names = "default";
 	status = "okay";
 };
 
@@ -1249,16 +1221,44 @@ usb_host0_xhci_drd_sw: endpoint {
 	};
 };
 
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
 &usb_host1_xhci {
 	dr_mode = "host";
 	status = "okay";
 };
 
-&usb_host1_ehci {
+&usbdp_phy0 {
+	mode-switch;
+	orientation-switch;
+	sbu1-dc-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
+	sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
 	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbdp_phy0_typec_ss: endpoint at 0 {
+			reg = <0>;
+			remote-endpoint = <&usbc0_ss>;
+		};
+
+		usbdp_phy0_typec_sbu: endpoint at 1 {
+			reg = <1>;
+			remote-endpoint = <&usbc0_sbu>;
+		};
+	};
 };
 
-&usb_host1_ohci {
+&usbdp_phy1 {
+	phy-supply = <&vbus5v0_usb>;
 	status = "okay";
 };
 
-- 
2.55.0