[PATCH 3/7] arm64: dts: rockchip: Fix hym8563 pinctrl name and sorting on NanoPC-T6

[Diederik de Haas]

Use the pinctrl names as used in the schematics and use natural sort order
by property names for the hym8563 RTC node.

Signed-off-by: Diederik de Haas <diederik at cknow-tech.com>
---
 arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
index 16c35250bacf..84bfb33a4774 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
@@ -536,10 +536,10 @@ hym8563: rtc at 51 {
 		reg = <0x51>;
 		#clock-cells = <0>;
 		clock-output-names = "hym8563";
-		pinctrl-names = "default";
-		pinctrl-0 = <&hym8563_int>;
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&rtc_int_l_pin>;
+		pinctrl-names = "default";
 		wakeup-source;
 	};
 };
@@ -704,7 +704,7 @@ hp_det: hp-det {
 	};
 
 	hym8563 {
-		hym8563_int: hym8563-int {
+		rtc_int_l_pin: rtc-int-l-pin {
 			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
-- 
2.55.0