[PATCH] ARM: dts: helios4: fix lm75 supply name

[Gregory CLEMENT]

Rosen Penev <rosenp at gmail.com> writes:

> The lm75 driver requests a regulator named "vs" (the +VS power pin
> of the chip).  The Helios4 DTS incorrectly used vcc-supply instead
> of vs-supply, causing the regulator core to emit:
>
>   lm75 0-004c: supply vs not found, using dummy regulator
>
> Fix the property name to match the binding and the driver.


Applied on mvebu/dt

Thanks,

Gregory

>
> Fixes: ced8025b569e ("ARM: dts: armada388-helios4")
> Assisted-by: opencode:big-pickle
> Signed-off-by: Rosen Penev <rosenp at gmail.com>
> ---
>  arch/arm/boot/dts/marvell/armada-388-helios4.dts | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/marvell/armada-388-helios4.dts b/arch/arm/boot/dts/marvell/armada-388-helios4.dts
> index 626a7339a5d0..af96d27e7159 100644
> --- a/arch/arm/boot/dts/marvell/armada-388-helios4.dts
> +++ b/arch/arm/boot/dts/marvell/armada-388-helios4.dts
> @@ -200,7 +200,7 @@ usb3-ilimit-hog {
>  				temp_sensor: temp at 4c {
>  					compatible = "ti,lm75";
>  					reg = <0x4c>;
> -					vcc-supply = <&reg_3p3v>;
> +					vs-supply = <&reg_3p3v>;
>  				};
>  
>  				eeprom at 53 {
> -- 
> 2.55.0
>

-- 
Grégory CLEMENT, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com