[PATCH v4 07/12] drm/mediatek: mtk_dp: Use PHY API for PHY power sequences

[CK Hu (胡俊光)]

On Thu, 2026-07-09 at 13:31 +0200, AngeloGioacchino Del Regno wrote:
> The PHY driver has gained support for .power_on() and .power_off()
> callbacks: use the API provided phy_power_on(), phy_power_off()
> functions instead of writing into PHY registers from this driver.
> 
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_dp.c | 31 ++++++++++++++++++++++++-------
>  1 file changed, 24 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_dp.c b/drivers/gpu/drm/mediatek/mtk_dp.c
> index b2e5fa0914bc..383c8e66b527 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dp.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dp.c
> @@ -1404,6 +1404,8 @@ static void mtk_dp_aux_panel_poweron(struct mtk_dp *mtk_dp, bool pwron)
>  
>  static void mtk_dp_power_enable(struct mtk_dp *mtk_dp)
>  {
> +	int ret;
> +
>  	mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_RESET_AND_PROBE,
>  			   0, SW_RST_B_PHYD);
>  
> @@ -1414,20 +1416,35 @@ static void mtk_dp_power_enable(struct mtk_dp *mtk_dp)
>  			   SW_RST_B_PHYD, SW_RST_B_PHYD);
>  	mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_PWR_STATE,
>  			   DP_PWR_STATE_BANDGAP_TPLL, DP_PWR_STATE_MASK);
> -	regmap_write(mtk_dp->regs, DP_PHY_AUX_RX_CTL,
> -		     RG_DPAUX_RX_VALID_DEGLITCH_EN | RG_XTP_GLB_CKDET_EN |
> -		     RG_DPAUX_RX_EN);
> -	regmap_clear_bits(mtk_dp->regs, MTK_DP_0034, DA_CKM_CKTX0_EN_FORCE_EN);
> +
> +	if (mtk_dp->phy_dev) {

You use unlikely in mtk_dp_power_disable(), so use it here.

Regards,
CK

> +		regmap_write(mtk_dp->regs, DP_PHY_AUX_RX_CTL,
> +			     RG_DPAUX_RX_VALID_DEGLITCH_EN | RG_XTP_GLB_CKDET_EN |
> +			     RG_DPAUX_RX_EN);
> +		regmap_clear_bits(mtk_dp->regs, MTK_DP_0034, DA_CKM_CKTX0_EN_FORCE_EN);
> +	} else {
> +		ret = phy_power_on(mtk_dp->phy);
> +		if (ret)
> +			dev_warn(mtk_dp->dev, "Could not power on PHY!\n");
> +	}
>  }
>  
>  static void mtk_dp_power_disable(struct mtk_dp *mtk_dp)
>  {
> +	int ret;
> +
>  	mtk_dp_write(mtk_dp, MTK_DP_TOP_PWR_STATE, 0);
>  
> -	regmap_set_bits(mtk_dp->regs, MTK_DP_0034, DA_CKM_CKTX0_EN_FORCE_EN);
> +	if (unlikely(mtk_dp->phy_dev)) {
> +		regmap_set_bits(mtk_dp->regs, MTK_DP_0034, DA_CKM_CKTX0_EN_FORCE_EN);
>  
> -	/* Disable RX */
> -	regmap_write(mtk_dp->regs, DP_PHY_AUX_RX_CTL, 0);
> +		/* Disable RX */
> +		regmap_write(mtk_dp->regs, DP_PHY_AUX_RX_CTL, 0);
> +	} else {
> +		ret = phy_power_off(mtk_dp->phy);
> +		if (ret)
> +			dev_warn(mtk_dp->dev, "Could not power off PHY!\n");
> +	}
>  
>  	mtk_dp_write(mtk_dp, MTK_DP_TOP_MEM_PD,
>  		     0x550 | FUSE_SEL | MEM_ISO_EN);