[PATCH v3 07/15] interconnect: qcom: Add Kuno interconnect provider driver

[Hardeep Sharma]

On 8/24/2026 1:27 PM, Abel Vesa wrote:
> On 26-08-21 21:39:00, Hardeep Sharma wrote:
>> Add the interconnect provider driver for the Qualcomm Kuno SoC to
>> enable bus bandwidth voting on the platform. This includes the
>> aggre-noc and cnoc-main NoC instances with their associated BCM
>> nodes.
>>
>> Reviewed-by: Konrad Dybcio <konrad.dybcio at oss.qualcomm.com>
>> Signed-off-by: Hardeep Sharma <hardeep.sharma at oss.qualcomm.com>
>> ---
>>   drivers/interconnect/qcom/Kconfig  |  13 +
>>   drivers/interconnect/qcom/Makefile |   2 +
>>   drivers/interconnect/qcom/kuno.c   | 977 +++++++++++++++++++++++++++++++++++++
>>   3 files changed, 992 insertions(+)
>>
> [...]
>
>> diff --git a/drivers/interconnect/qcom/kuno.c b/drivers/interconnect/qcom/kuno.c
>> new file mode 100644
>> index 000000000000..9a5bd53e7ed9
>> --- /dev/null
>> +++ b/drivers/interconnect/qcom/kuno.c
>> @@ -0,0 +1,977 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
>> + */
> [...]
>
>> +static const struct of_device_id qnoc_of_match[] = {
>> +	{ .compatible = "qcom,kuno-aggre-noc", .data = &kuno_aggre_noc },
>> +	{ .compatible = "qcom,kuno-clk-virt", .data = &kuno_clk_virt },
>> +	{ .compatible = "qcom,kuno-cnoc-main", .data = &kuno_cnoc_main },
>> +	{ .compatible = "qcom,kuno-dc-noc", .data = &kuno_dc_noc },
>> +	{ .compatible = "qcom,kuno-mc-virt", .data = &kuno_mc_virt },
>> +	{ .compatible = "qcom,kuno-mem-noc", .data = &kuno_mem_noc },
>> +	{ .compatible = "qcom,kuno-pcie-anoc", .data = &kuno_pcie_anoc },
>> +	{ .compatible = "qcom,kuno-system-noc", .data = &kuno_system_noc },
>> +	{ }
>> +};
>> +MODULE_DEVICE_TABLE(of, qnoc_of_match);
>> +
>> +static struct platform_driver qnoc_driver = {
>> +	.probe = qcom_icc_rpmh_probe,
>> +	.remove = qcom_icc_rpmh_remove,
>> +	.driver = {
>> +		.name = "qnoc-kuno",
>> +		.of_match_table = qnoc_of_match,
>> +		.sync_state = icc_sync_state,
>> +	},
>> +};
> qnoc_driver_init() and core_initcall()
>
> then
>
> qnoc_driver_exit() and module_exit()
>
> Please have a look at all other Qualcomm interconnect drivers in upstream.

Thanks for review.

Corrected in v4 : 
https://lore.kernel.org/all/20260827-kuno-soc-support-v4-0-dd34f235fc1a@oss.qualcomm.com/

Best Wishes
Hardeep Sharma