[PATCH v4] iommu/io-pgtable-arm: Add support for contiguous hint bit

[Vijayanand Jitta]

On 8/27/2026 1:54 PM, Vijayanand Jitta wrote:
> 
> 
> On 8/15/2026 3:27 AM, Daniel Mentz wrote:
>> On Mon, Aug 3, 2026 at 11:19 PM Vijayanand Jitta
>> <vijayanand.jitta at oss.qualcomm.com> wrote:
>>> +static unsigned long arm_lpae_get_cont_sizes(struct io_pgtable_cfg *cfg)
>>> +{
>>> +       unsigned long pg_size, blk_size, l1_blk_size, cont_sizes = 0;
>>> +       unsigned long cont_leaf_size, cont_blk_size, cont_l1_blk_size;
>>> +       int pg_shift, bits_per_level;
>>> +
>>> +       if (!cfg->pgsize_bitmap || (cfg->quirks & IO_PGTABLE_QUIRK_ARM_NO_CONT_HINT))
>>> +               return 0;
>>> +
>>> +       pg_shift = __ffs(cfg->pgsize_bitmap);
>>> +       bits_per_level = pg_shift - ilog2(sizeof(arm_lpae_iopte));
>>> +       pg_size = 1UL << pg_shift;
>>> +       blk_size = pg_size << bits_per_level;
>>> +       l1_blk_size = blk_size << bits_per_level;
>>> +
>>> +       cont_leaf_size = arm_lpae_num_cont(pg_size) * pg_size;
>>> +       if ((cfg->pgsize_bitmap & pg_size) &&
>>> +           arm_lpae_cont_size_fits(cfg, cont_leaf_size))
>>> +               cont_sizes |= cont_leaf_size;
>>> +
>>> +       if (cfg->pgsize_bitmap & blk_size) {
>>> +               cont_blk_size = arm_lpae_num_cont(blk_size) * blk_size;
>>> +               if (arm_lpae_cont_size_fits(cfg, cont_blk_size))
>>> +                       cont_sizes |= cont_blk_size;
>>> +       }
>>> +
>>> +       /*
>>> +        * l1_blk_size is only set in pgsize_bitmap if level-1 blocks are
>>> +        * supported for this granule (not 16K/64K, per
>>> +        * arm_lpae_restrict_pgsizes()), so no extra gating is needed here.
>>> +        */
>>> +       if (cfg->pgsize_bitmap & l1_blk_size) {
>>> +               cont_l1_blk_size = arm_lpae_num_cont(l1_blk_size) * l1_blk_size;
>>
>> Our AI model is saying that this might overflow cont_l1_blk_size on 32
>> bit platforms i.e. 16 * 1G doesn't fit into a 32 bit type. It says
>> that cont_l1_blk_size will be truncated to 0, and
>> arm_lpae_cont_size_fits() then calls ilog2(0) which is undefined.
>>
> 
> Ack. With arm_lpae_cont_size_fits removed this won't be an issue anymore.
> 
>>> +               if (arm_lpae_cont_size_fits(cfg, cont_l1_blk_size))
>>> +                       cont_sizes |= cont_l1_blk_size;
>>> +       }
>>> +
>>> +       return cont_sizes;
>>> +}
>> [...]
>>> @@ -660,6 +829,8 @@ static size_t __arm_lpae_unmap(struct arm_lpae_io_pgtable *data,
>>>  {
>>>         arm_lpae_iopte pte;
>>>         struct io_pgtable *iop = &data->iop;
>>> +       size_t block_size = ARM_LPAE_BLOCK_SIZE(lvl, data);
>>> +       int num_cont = arm_lpae_num_cont(block_size);
>>>         int i = 0, num_entries, max_entries, unmap_idx_start;
>>>
>>>         /* Something went horribly wrong and we ran out of page table */
>>> @@ -674,10 +845,22 @@ static size_t __arm_lpae_unmap(struct arm_lpae_io_pgtable *data,
>>>                 return 0;
>>>         }
>>>
>>> +       /*
>>> +        * Normalize an exact whole-CONT-group request down to the
>>> +        * equivalent block_size/pgcount, mirroring __arm_lpae_map().
>>> +        */
>>> +       if (!(data->iop.cfg.quirks & IO_PGTABLE_QUIRK_ARM_NO_CONT_HINT) &&
>>> +           num_cont > 1 && size == block_size * num_cont) {
>>> +               pgcount *= num_cont;
>>> +               size = block_size;
>>> +       }
>>> +
>>>         /* If the size matches this level, we're in the right place */
>>> -       if (size == ARM_LPAE_BLOCK_SIZE(lvl, data)) {
>>> +       if (size == block_size) {
>>> +               size_t cont_size = num_cont * block_size;
>>> +
>>>                 max_entries = arm_lpae_max_entries(unmap_idx_start, data);
>>> -               num_entries = min_t(int, pgcount, max_entries);
>>> +               num_entries = min_t(size_t, pgcount, max_entries);
>>>
>>>                 /* Find and handle non-leaf entries */
>>
>> This comment is no longer accurate. The handling now extends beyond
>> non-leaf entries.
>>
> 
> Agreed, that comment is stale -- the loop now also validates CONT-group
> alignment on leaf entries (rejecting an unmap that would split a tagged
> group) before falling through to the non-leaf teardown. Will update it to
> something like:
> 
> /* Validate leaf entries and handle non-leaf entries */
> 
> 

You can ignore the above comment, after moving the checks to outside the loop
the earlier comment would stay accurate for the loop.

Thanks,
Vijay
>>>                 for (i = 0; i < num_entries; i++) {
>>> @@ -687,6 +870,40 @@ static size_t __arm_lpae_unmap(struct arm_lpae_io_pgtable *data,
>>>                                 break;
>>>                         }
>>>
>>> +                       /*
>>> +                        * A real CONT group must always be invalidated as a
>>> +                        * unit, so reject an unmap that splits one. Check the
>>> +                        * PTE's own CONT bit rather than the caller's size,
>>> +                        * since a legitimate unmap can span multiple prior
>>> +                        * iommu_map() calls and its size alone doesn't say how
>>> +                        * the underlying PTEs were grouped. Only the first and
>>> +                        * last entries can straddle a group boundary; an
>>> +                        * interior CONT-tagged entry's group is necessarily
>>> +                        * fully covered by this unmap, since groups can't
>>> +                        * overlap without also covering everything between
>>> +                        * them.
>>> +                        */
>>> +                       if (pte & ARM_LPAE_PTE_CONT) {
>>> +                               bool ok = true;
>>> +
>>> +                               if (i == 0)
>>> +                                       ok = ok && IS_ALIGNED(iova, cont_size);
>>> +                               if (i == num_entries - 1)
>>> +                                       ok = ok && IS_ALIGNED(iova + (i + 1) * block_size,
>>> +                                                             cont_size);
>>> +
>>> +                               /*
>>> +                                * Stop short of this entry instead of returning
>>> +                                * 0: entries before i may already have had
>>> +                                * non-leaf sub-tables torn down above, so the
>>> +                                * caller needs the real unmapped count, and the
>>> +                                * loop exit below still clears/gathers entries
>>> +                                * [0, i) correctly.
>>> +                                */
>>> +                               if (WARN_ON_ONCE(!ok))
>>
>> Consider aligning with the following WARN_ONCE in the same function:
>>
>> WARN_ONCE(true, "Unmap of a partial large IOPTE is not allowed");
>>
> 
> Ack.
> 
>>> +                                       break;
>>
>> I think this behavior is inconsistent: when a problem is detected at
>> the beginning of the unmap range, you return without modifying the
>> table, whereas if it's detected at the end, the code proceeds with
>> unmapping and leaves the table misconfigured. Could these checks be
>> performed before entering the loop?
>>
> 
> Agreed, Will move both checks before the loop so a rejected unmap is always a
> full no-op, regardless of whether the violation is at the start or end of
> the range.
> 
> Thanks,
> Vijay
> 
>>> +                       }
>>> +
>>>                         if (!iopte_leaf(pte, lvl, iop->fmt)) {
>>>                                 __arm_lpae_clear_pte(&ptep[i], &iop->cfg, 1);
>>>
>