[PATCH v1 0/1] ARM: dts: draeger: Add devicetrees for Draeger's M48 board.

[Petko Manolov]

Adding the device trees for “Dräger M48 on NXP i.MX6 (Q) and Intel/Altera
SoCFPGA Cyclone V” board variant.  It has both (the SoC and FPGA) on the same
carrier and they are cross-monitoring each other.

Petko Manolov (1):
  ARM: dts: draeger: Add devicetree files for M48 on NXP i.MX6(Q)

 arch/arm/boot/dts/nxp/imx/Makefile            |   2 +
 .../boot/dts/nxp/imx/imx6dl-draeger-m48.dts   |  23 ++
 .../boot/dts/nxp/imx/imx6q-draeger-m48.dts    |  23 ++
 .../boot/dts/nxp/imx/imx6qdl-draeger-m48.dtsi | 369 ++++++++++++++++++
 .../boot/dts/nxp/imx/imx6qp-draeger-m48.dts   |  78 ++++
 5 files changed, 495 insertions(+)
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6dl-draeger-m48.dts
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6q-draeger-m48.dts
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6qdl-draeger-m48.dtsi
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6qp-draeger-m48.dts

-- 
2.47.3