[PATCH 2/2] arm64: dts: freescale: add MR-NAVQ95 basic board support
Laurentiu Mihalcea
laurentiumihalcea111 at gmail.com
Tue Aug 25 05:08:12 PDT 2026
From: Laurentiu Mihalcea <laurentiu.mihalcea at nxp.com>
Add basic support for NXP's MR-NAVQ95 board. This board is designed for
robotics applications (e.g. drones, rovers, humanoids, etc..) and has the
following hardware feats (list is not exhaustive):
* based on i.MX95 19x19 SoC
* 64GB eMMC
* up to 16GB of LPDDR5 memory
* 1 x USB 2.0 TypeC
* 1 x USB 3.0 TypeC
* 1 x RJ45 port with RTL8211 PHY
The support targets revision B of the board.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea at nxp.com>
---
arch/arm64/boot/dts/freescale/Makefile | 1 +
arch/arm64/boot/dts/freescale/imx95-navq.dts | 267 +++++++++++++++++++
2 files changed, 268 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx95-navq.dts
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 95ae85ab4adf..4c5ef83cd857 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -712,6 +712,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk-sof.dtb
dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-frdm-pro.dtb
dtb-$(CONFIG_ARCH_MXC) += imx95-aquila-clover.dtb
dtb-$(CONFIG_ARCH_MXC) += imx95-aquila-dev.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx95-navq.dtb
dtb-$(CONFIG_ARCH_MXC) += imx95-toradex-smarc-dev.dtb
dtb-$(CONFIG_ARCH_MXC) += imx95-tqma9596la-mba95xxca.dtb
dtb-$(CONFIG_ARCH_MXC) += imx95-tqma9596sa-mb-smarc-2.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx95-navq.dts b/arch/arm64/boot/dts/freescale/imx95-navq.dts
new file mode 100644
index 000000000000..f7ddc39f9b21
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95-navq.dts
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2026 NXP
+ */
+
+/dts-v1/;
+
+#include "imx95.dtsi"
+
+/ {
+ model = "NXP MR-NAVQ95";
+ compatible = "fsl,imx95-navq", "fsl,imx95";
+
+ aliases {
+ ethernet0 = &enetc_port0;
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
+ serial0 = &lpuart1;
+ };
+
+ chosen {
+ stdout-path = &lpuart1;
+ };
+
+ reg_usdhc2_vmmc: regulator-usdhc2 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+ regulator-name = "VDD_SD2_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ off-on-delay-us = <12000>;
+ };
+};
+
+&edma1 {
+ /* owned by M7 */
+ status = "reserved";
+};
+
+&edma2 {
+ /* channels 30-63 owned by M7 */
+ dma-channels = <30>;
+};
+
+&enetc_port0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enetc0>;
+ phy-handle = <ðphy0>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+};
+
+&lpi2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpi2c3>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ i2c3_gpio_expander_21: gpio-expander at 21 {
+ compatible = "nxp,pcal6408";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3_gpio_expander_21>;
+ };
+};
+
+&lpuart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&netc_blk_ctrl {
+ status = "okay";
+};
+
+&netc_emdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_emdio>;
+ status = "okay";
+
+ ethphy0: ethernet-phy at 1 {
+ compatible = "ethernet-phy-id001c.c916";
+ reg = <1>;
+ reset-gpios = <&i2c3_gpio_expander_21 1 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <80000>;
+ realtek,clkout-disable;
+ };
+};
+
+&scmi_iomuxc {
+ pinctrl_emdio: emdiogrp {
+ fsl,pins = <
+ IMX95_PAD_ENET2_MDC__NETCMIX_TOP_NETC_MDC 0x57e
+ IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_NETC_MDIO 0x97e
+ >;
+ };
+
+ pinctrl_enetc0: enetc0grp {
+ fsl,pins = <
+ IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3 0x57e
+ IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2 0x57e
+ IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1 0x57e
+ IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0 0x57e
+ IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL 0x57e
+ IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK 0x58e
+ IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL 0x57e
+ IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK 0x58e
+ IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0 0x57e
+ IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1 0x57e
+ IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2 0x57e
+ IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3 0x57e
+ >;
+ };
+
+ pinctrl_i2c3_gpio_expander_21: i2c3gpioexpander21grp {
+ fsl,pins = <
+ IMX95_PAD_ENET2_RD3__GPIO4_IO_BIT27 0x31e
+ >;
+ };
+
+ pinctrl_lpi2c3: lpi2c3grp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e
+ IMX95_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e
+ >;
+ };
+
+ pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+ fsl,pins = <
+ IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7 0x31e
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ IMX95_PAD_UART1_RXD__AONMIX_TOP_LPUART1_RX 0x31e
+ IMX95_PAD_UART1_TXD__AONMIX_TOP_LPUART1_TX 0x31e
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+ fsl,pins = <
+ IMX95_PAD_SD1_CLK__USDHC1_CLK 0x158e
+ IMX95_PAD_SD1_CMD__USDHC1_CMD 0x138e
+ IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x138e
+ IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x138e
+ IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x138e
+ IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x138e
+ IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x138e
+ IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x138e
+ IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x138e
+ IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x138e
+ IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x158e
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+ fsl,pins = <
+ IMX95_PAD_SD1_CLK__USDHC1_CLK 0x15fe
+ IMX95_PAD_SD1_CMD__USDHC1_CMD 0x13fe
+ IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe
+ IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe
+ IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x13fe
+ IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x13fe
+ IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe
+ IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe
+ IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe
+ IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe
+ IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ IMX95_PAD_SD1_CLK__USDHC1_CLK 0x158e
+ IMX95_PAD_SD1_CMD__USDHC1_CMD 0x138e
+ IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x138e
+ IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x138e
+ IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x138e
+ IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x138e
+ IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x138e
+ IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x138e
+ IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x138e
+ IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x138e
+ IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x158e
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <
+ IMX95_PAD_SD2_CLK__USDHC2_CLK 0x158e
+ IMX95_PAD_SD2_CMD__USDHC2_CMD 0x138e
+ IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x138e
+ IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x138e
+ IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x138e
+ IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x138e
+ IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <
+ IMX95_PAD_SD2_CLK__USDHC2_CLK 0x158e
+ IMX95_PAD_SD2_CMD__USDHC2_CMD 0x138e
+ IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x138e
+ IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x138e
+ IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x138e
+ IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x138e
+ IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+ fsl,pins = <
+ IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0 0x31e
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ IMX95_PAD_SD2_CLK__USDHC2_CLK 0x158e
+ IMX95_PAD_SD2_CMD__USDHC2_CMD 0x138e
+ IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x138e
+ IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x138e
+ IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x138e
+ IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x138e
+ IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
+ >;
+ };
+
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ pinctrl-3 = <&pinctrl_usdhc1>;
+ bus-width = <8>;
+ non-removable;
+ no-sdio;
+ no-sd;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-3 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <®_usdhc2_vmmc>;
+ bus-width = <4>;
+ status = "okay";
+};
--
2.53.0
More information about the linux-arm-kernel
mailing list