[PATCH v6 05/12] ARM: dts: aspeed: anacapa: Add additional EEPROM node for SCM

[Colin Huang via B4 Relay]

From: Colin Huang <u8813345 at gmail.com>

The SCM FRU EEPROM I2C address differs between SCM revisions:
- Rev B uses address 0x50
- Rev C/D/E/F and later use address 0x51

Add an additional AT24C128 EEPROM node at 0x51 on i2c9 so the same
device tree can support multiple SCM revisions.

Signed-off-by: Colin Huang <u8813345 at gmail.com>
---
 .../boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts   | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
index 075ac39f369f..d2b4855ff1ad 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
@@ -8,6 +8,20 @@ / {
 	model = "Facebook Anacapa BMC";
 };
 
+// SCM
+&i2c9 {
+	// SCM FRU
+	// | DC-SCM Rev        | Slave address of eeprom  |
+	// |-------------------|--------------------------|
+	// | Rev B             | 0x50                     |
+	// | Rev C/D/E/F/above | 0x51                     |
+
+	eeprom at 51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+};
+
 &sgpiom0 {
 	bus-frequency = <2000000>;
 	gpio-line-names =

-- 
2.34.1