[PATCH] phy: rockchip-samsung-dcphy: Enable runtime PM at PHY core level

[Sebastian Reichel]

Hi,

On Fri, Aug 21, 2026 at 07:44:19PM +0800, Jason Yang via B4 Relay wrote:
> From: Jason Yang <jason98166 at gmail.com>
> 
> phy_create() only enables runtime PM on the new PHY device if the parent
> already has it enabled, and this driver enables it afterwards. The PHY
> device therefore never gets runtime PM, and phy_pm_runtime_get_sync()
> returns -ENOTSUPP for every phy_init() and phy_power_on(). The block is
> still resumed today, but only through the supplier link fw_devlink builds
> from the phys phandle, which fw_devlink=off and =permissive do not.
> 
> Move devm_pm_runtime_enable() before devm_phy_create(), as done for the
> sibling HDPTX PHY in commit 10ba8479f460 ("phy:
> phy-rockchip-samsung-hdptx: Enable runtime PM at PHY core level").
> 
> Fixes: b2a1a2ae7818 ("phy: rockchip: Add Samsung MIPI D-/C-PHY driver")
> Signed-off-by: Jason Yang <jason98166 at gmail.com>
> ---

Reviewed-by: Sebastian Reichel <sebastian.reichel at collabora.com>

Greetings,

-- Sebastian

>  drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c b/drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c
> index cbd780556da8..11e872cc6611 100644
> --- a/drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c
> +++ b/drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c
> @@ -1610,16 +1610,16 @@ static int samsung_mipi_dcphy_probe(struct platform_device *pdev)
>  		return dev_err_probe(dev, PTR_ERR(samsung->grf_apb_rst),
>  				     "Failed to get system grf_apb_rst control\n");
>  
> +	ret = devm_pm_runtime_enable(dev);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "Failed to enable runtime PM\n");
> +
>  	samsung->phy = devm_phy_create(dev, NULL, &samsung_mipi_dcphy_ops);
>  	if (IS_ERR(samsung->phy))
>  		return dev_err_probe(dev, PTR_ERR(samsung->phy), "Failed to create MIPI DC-PHY\n");
>  
>  	phy_set_drvdata(samsung->phy, samsung);
>  
> -	ret = devm_pm_runtime_enable(dev);
> -	if (ret)
> -		return dev_err_probe(dev, ret, "Failed to enable runtime PM\n");
> -
>  	phy_provider = devm_of_phy_provider_register(dev, samsung_mipi_dcphy_xlate);
>  	if (IS_ERR(phy_provider))
>  		return dev_err_probe(dev, PTR_ERR(phy_provider),
> 
> ---
> base-commit: 1590cf0329716306e948a8fc29f1d3ee87d3989f
> change-id: 20260821-dcphy-rpm-v1-14c80daecbf7
> 
> Best regards,
> -- 
> Jason Yang <jason98166 at gmail.com>
> 
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20260821/a24646a5/attachment-0001.sig>