[PATCH 2/2] arm64: dts: exynos850: Add GPU/Mali Bifrost node

[Thomas Turner]

This can provide basic GPU functionality for the Exynos850 platform.
Tested on the SM-A217F device. Does not provide support for temperature
throttling, DVFS, power domains, governor support, boosting and voltage
control. Once PMIC is properly implemented, support will hopefully
increase. However the panfrost driver probes, the Mali-G52 GPU
initializes and the core clock is set-up.

Signed-off-by: Thomas Turner <tturner at lineageos.org>
---
 arch/arm64/boot/dts/exynos/exynos850.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi
index 3881f573ec08..8ed85c125030 100644
--- a/arch/arm64/boot/dts/exynos/exynos850.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi
@@ -296,6 +296,18 @@ cmu_g3d: clock-controller at 11400000 {
 			clock-names = "oscclk", "dout_g3d_switch";
 		};
 
+		gpu: gpu at 11500000 {
+			compatible = "samsung,exynos850-mali", "arm,mali-bifrost";
+			reg = <0x11500000 0x5000>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu";
+			clocks = <&cmu_g3d CLK_GOUT_G3D_GPU_CLK>;
+			clock-names = "core";
+			status = "disabled";
+		};
+
 		cmu_apm: clock-controller at 11800000 {
 			compatible = "samsung,exynos850-cmu-apm";
 			reg = <0x11800000 0x8000>;
-- 
2.47.3