[PATCH v5 06/12] dt-bindings: serial: add Ambarella CV75 UART

[Krzysztof Kozlowski]

On 18/08/2026 12:31, Long Zhao via B4 Relay wrote:
> From: Long Zhao <longzhao at ambarella.com>
> 
> Document the Ambarella CV75 on-chip UART controller binding for early
> console bring-up. The binding requires a single RCT clock input and
> fixed 32-bit register access via reg-shift and reg-io-width.
> 
> Signed-off-by: Long Zhao <longzhao at ambarella.com>
> ---
>  .../bindings/serial/ambarella,cv75-uart.yaml       | 56 ++++++++++++++++++++++
>  1 file changed, 56 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/serial/ambarella,cv75-uart.yaml b/Documentation/devicetree/bindings/serial/ambarella,cv75-uart.yaml
> new file mode 100644
> index 000000000000..223c84bf460d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/serial/ambarella,cv75-uart.yaml
> @@ -0,0 +1,56 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/serial/ambarella,cv75-uart.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Ambarella CV75 UART
> +
> +maintainers:
> +  - Long Zhao <longzhao at ambarella.com>
> +
> +allOf:
> +  - $ref: serial.yaml#
> +
> +properties:
> +  compatible:
> +    const: ambarella,cv75-uart
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  reg-shift:
> +    const: 2
> +
> +  reg-io-width:
> +    const: 4

Both properties are redundant. Const properties are pointless. Did you
take any existing code as example of this? If so which, so we can fix it?

Best regards,
Krzysztof