[PATCH v2] i2c: mxs: fix DMA channel leak on probe error

[Ruoyu Wang]

mxs_i2c_probe() requests an exclusive DMA channel before resetting the
controller and registering the I2C adapter. If either later operation
fails, probe returns without releasing the channel because the remove
callback is not invoked after a failed probe.

Use devm_dma_request_chan() so the device core releases the channel on
probe failure and driver detach. Remove the manual release from the
remove callback because the channel is now device-managed.

This issue was found by a static analysis checker and confirmed by
manual source review.

Fixes: 62885f59a261 ("MXS: Implement DMA support into mxs-i2c")
Assisted-by: unnamed:claude-opus-4.8 typestate
Signed-off-by: Ruoyu Wang <ruoyuw560 at gmail.com>

---
Changes in v2:
- Use devm_dma_request_chan() instead of explicit error unwinding.
- Remove the now-redundant manual release in remove().
- Add the Assisted-by tag.

v1: https://lore.kernel.org/r/20260814134033.1386874-1-ruoyuw560@gmail.com/
---
 drivers/i2c/busses/i2c-mxs.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 4e07babea9c3f4..eee4fdcd9df31a 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -839,7 +839,7 @@ static int mxs_i2c_probe(struct platform_device *pdev)
 	}
 
 	/* Setup the DMA */
-	i2c->dmach = dma_request_chan(dev, "rx-tx");
+	i2c->dmach = devm_dma_request_chan(dev, "rx-tx");
 	if (IS_ERR(i2c->dmach)) {
 		return dev_err_probe(dev, PTR_ERR(i2c->dmach),
 				     "Failed to request dma\n");
@@ -877,9 +877,6 @@ static void mxs_i2c_remove(struct platform_device *pdev)
 
 	i2c_del_adapter(&i2c->adapter);
 
-	if (i2c->dmach)
-		dma_release_channel(i2c->dmach);
-
 	writel(MXS_I2C_CTRL0_SFTRST, i2c->regs + MXS_I2C_CTRL0_SET);
 }
 
-- 
2.51.0