[PATCH v5 00/15] ARM: dts: aspeed: anacapa: restructure devicetree for development-phase

[Colin Huang via B4 Relay]

This series refactors the Anacapa BMC devicetree layout to better support
development-phase hardware revisions (EVT1/EVT2/DVT) while keeping a platform
entrypoint.

Signed-off-by: Colin Huang <u8813345 at gmail.com>
---
Changes in v5:
- Remove redundant vhub pinctrl-names
- Use default SPI2 memory mapping
- Fix dt-check-style strict violations
- Add Acked-by from Conor Dooley
- Sort compatible strings in alphabetical order
- More commit message for ARM: dts: aspeed: anacapa: Add EVT1 devicetree and point wrapper to it.
- Update commit message to describe both LPDB and RPDB GPIO expanders  
- Link to v4: https://lore.kernel.org/r/20260805-anacapa-devlop-phase-devicetree-v4-0-5d67e0efa6c5@gmail.com

Changes in v4:
- Capitalize the first word of the short description.
- Rework the Anacapa development-phase devicetree hierarchy.
- Ensure that anacapa-evt1 generates an identical devicetree to the existing aspeed-bmc-facebook-anacapa.dts.
- Add SPI flash VCC supply.
- Simplify leakage GPIO line names.
- Add LPDB fuse monitor GPIO expander.
- Link to v3: https://lore.kernel.org/r/20260602-anacapa-devlop-phase-devicetree-v3-0-7c93c5df8d9b@gmail.com

Changes in v3:
- Restructure the EVT2 devicetree to inherit from the EVT1 devicetree, making it incremental rather than standalone.
- Add the DVT devicetree, inheriting from the EVT2 devicetree.
- Enable MCTP and FRU support for the NIC.
- Align PDB fan GPIO numbering.
- Add an EEPROM device node for the NFC adaptor board.
- Add an additional EEPROM device node for the SCM.
- Add shunt resistor values for HSC monitors
- Link to v2: https://lore.kernel.org/r/20260409-anacapa-devlop-phase-devicetree-v2-0-68f328671653@gmail.com

Changes in v2:
- Fix dtbs_check fail.
  Validated by following command:
    make dt_binding_check DT_SCHEMA_FILES=arm/aspeed/aspeed.yaml
    make CHECK_DTBS=y DT_SCHEMA_FILES=arm/aspeed/aspeed.yaml aspeed/aspeed-bmc-facebook-anacapa.dtb
    make CHECK_DTBS=y DT_SCHEMA_FILES=arm/aspeed/aspeed.yaml aspeed/aspeed-bmc-facebook-anacapa-evt1.dtb
    make CHECK_DTBS=y DT_SCHEMA_FILES=arm/aspeed/aspeed.yaml aspeed/aspeed-bmc-facebook-anacapa-evt2.dtb
- Link to v1: https://lore.kernel.org/r/20260407-anacapa-devlop-phase-devicetree-v1-0-97b96367cac3@gmail.com

---
Andy Chung (1):
      ARM: dts: aspeed: anacapa: Enable MCTP and FRU for NIC

Carl Lee (1):
      ARM: dts: aspeed: anacapa: Add eeprom device node for NFC adaptor board

Colin Huang (9):
      dt-bindings: arm: aspeed: Add Anacapa EVT1 EVT2 DVT board
      ARM: dts: aspeed: anacapa: Add EVT1 devicetree and point wrapper to it
      ARM: dts: aspeed: anacapa: Add EVT2 devicetree inheriting EVT1
      ARM: dts: aspeed: anacapa: Add DVT devicetree inheriting EVT2
      ARM: dts: aspeed: anacapa: Add additional EEPROM node for SCM
      ARM: dts: aspeed: anacapa: evt2: Add shunt resistor values for HSC monitors
      ARM: dts: aspeed: anacapa: fix dt-check-style strict violations
      ARM: dts: aspeed: anacapa: Use default SPI2 memory mapping
      ARM: dts: aspeed: anacapa: Remove redundant vhub pinctrl-names

Rex Fu (4):
      ARM: dts: aspeed: anacapa: Align PDB fan GPIO numbering
      ARM: dts: aspeed: anacapa: Add LPDB fuse monitor GPIO expander
      ARM: dts: aspeed: anacapa: Simplify leakage GPIO line names
      ARM: dts: aspeed: anacapa: Add SPI flash VCC supply

 .../devicetree/bindings/arm/aspeed/aspeed.yaml     |    3 +
 .../dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts |  270 +++++
 .../aspeed/aspeed-bmc-facebook-anacapa-evt1.dts    | 1128 ++++++++++++++++++++
 .../aspeed/aspeed-bmc-facebook-anacapa-evt2.dts    |  435 ++++++++
 .../dts/aspeed/aspeed-bmc-facebook-anacapa.dts     | 1078 +------------------
 5 files changed, 1837 insertions(+), 1077 deletions(-)
---
base-commit: 112264fb0bd0a7982b13da18cd3e289e2ab76eed
change-id: 20260407-anacapa-devlop-phase-devicetree-4101d3f312c0

Best regards,
-- 
Colin Huang <u8813345 at gmail.com>