[PATCH v3 1/4] dt-bindings: lcdif: Add endpoint bus-width property

[Krzysztof Kozlowski]

On 13/08/2026 10:56, Alexander Stein wrote:
> Am Donnerstag, 13. August 2026, 10:34:02 CEST schrieb Francesco Dolcini:
>> On Thu, Aug 13, 2026 at 10:10:43AM +0200, Krzysztof Kozlowski wrote:
>>> On Wed, Aug 12, 2026 at 03:29:49PM +0200, Francesco Dolcini wrote:
>>>> From: Francesco Dolcini <francesco.dolcini at toradex.com>
>>>>
>>>> The DPI output of the LCD interface can be configured with a bus width
>>>> of 16, 18, or 24 bits. Introduce a bus-width property to the output
>>>> endpoint, specifying the number of parallel RGB bits connected.
>>>>
>>>> Signed-off-by: Francesco Dolcini <francesco.dolcini at toradex.com>
>>>> ---
>>>> v3: use video-interfaces.yaml
>>>> v2: use the common bus-width property instead of the legacy interface-pix-fmt
>>>> ---
>>>>  Documentation/devicetree/bindings/display/fsl,lcdif.yaml | 9 +++++++++
>>>>  1 file changed, 9 insertions(+)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
>>>> index 2dd0411ec651..1f3daf002707 100644
>>>> --- a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
>>>> +++ b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
>>>> @@ -71,6 +71,15 @@ properties:
>>>>      $ref: /schemas/graph.yaml#/properties/port
>>>>      description: The LCDIF output port
>>>>  
>>>> +    properties:
>>>> +      endpoint:
>>>> +        $ref: /schemas/media/video-interfaces.yaml
>>>
>>> This won't work, you need to test your DTS. The port schema does not
>>> allow video-interfaces properties. You need port-base, like in every
>>> other case.
>>
>> Thanks for the review Krzysztof
>>
>> Given my testing was not ok, and I am not sure what I did wrong exactly
>> on my tests, is this the change I should do?

Yes

>>
>> diff --git a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
>> index 1f3daf002707..89cea0c14cf1 100644
>> --- a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
>> +++ b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
>> @@ -68,7 +68,8 @@ properties:
>>      maxItems: 1
>>  
>>    port:
>> -    $ref: /schemas/graph.yaml#/properties/port
>> +    $ref: /schemas/graph.yaml#/$defs/port-base
>> +    unevaluatedProperties: false
>>      description: The LCDIF output port
> 
> With that change:
> Tested-by: Alexander Stein <alexander.stein at ew.tq-group.com>

Please do not. Build testing is not testing (in the meaning of
"Tested-by" tag), otherwise where is Rob's tested-by tag for all the
patches he build tested?

Best regards,
Krzysztof