[PATCH v3 6/7] ARM: dts: nxp: imx6qdl-pico: Replace clock-frequency in camera sensor node

[Frank Li]

On Mon, Aug 10, 2026 at 10:08:00PM +0300, Laurent Pinchart wrote:
> On Mon, Aug 10, 2026 at 01:55:41PM -0500, Frank Li wrote:
> > On Mon, Aug 10, 2026 at 09:06:03PM +0300, Laurent Pinchart wrote:
> > > The clock-frequency for camera sensors has been deprecated in favour of
> > > the assigned-clocks and assigned-clock-rates properties. Replace it in
> > > the device tree.
> >
> > Remove "clock-frequency" may break back compatiblity.
> >
> > A similar case
> > https://lore.kernel.org/imx/20d37ab7-308e-4f07-96dc-7ae011af76d0@kernel.org/
> > https://lore.kernel.org/imx/20260404-thoughtful-placid-boobook-da26da@quoll/
> >
> > Need provide judgement in commit message about impact of break ABI.
>
> What ABI breakage ? The latest kernel supports the updated bindings
> (merged in commit aa1826696a55 ("dt-bindings: media: Deprecate
> clock-frequency property for camera sensors") in v6.18).

Dts now not only use by kenrel. such as uboot may use the same dts file.

uboot may still use "clock-frequency". but uboot unlikely use camera. for
this case, just need mention at commit message

"lock-frequency property for camera sensor have deprecated since
 ("dt-bindings: media: Deprecate  clock-frequency property for camera
 sensors") in v6.18, no known other user like (uboot) use it. So drop
it safely"

Frank

>
> > > Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> > > ---
> > > Changes since v1:
> > >
> > > - Drop added blank line
> > > ---
> > >  arch/arm/boot/dts/nxp/imx/imx6qdl-pico.dtsi | 4 +++-
> > >  1 file changed, 3 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-pico.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico.dtsi
> > > index ca4cb986efbc..0cc05d084f9b 100644
> > > --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-pico.dtsi
> > > +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico.dtsi
> > > @@ -233,7 +233,9 @@ camera at 3c {
> > >  		pinctrl-0 = <&pinctrl_ov5645>;
> > >  		reg = <0x3c>;
> > >  		clocks = <&clks IMX6QDL_CLK_CKO2>;
> > > -		clock-frequency = <24000000>;
> > > +		assigned-clocks = <&clks IMX6QDL_CLK_CKO2>;
> > > +		assigned-clock-rates = <24000000>;
> > > +
> > >  		vdddo-supply = <&reg_1p8v>;
> > >  		vdda-supply = <&reg_2p8v>;
> > >  		vddd-supply = <&reg_1p5v>;
>
> --
> Regards,
>
> Laurent Pinchart