[PATCH v6 03/10] phy: rockchip: samsung-hdptx: Guard against clk rate integer underflow

[Cristian Ciocaltea]

The 'fout' subtraction in rk_hdptx_phy_clk_calc_rate_from_pll_cfg()
could result in an integer underflow, if the hardware registers are
misconfigured or contain uninitialized values, such that the computed
sigma-delta modulator offset sdm exceeds the base frequency fout.

This might lead to an absurdly high clock rate being returned to the
Common Clock Framework, with unpredictable effects on downstream clk
consumers.

Provide the necessary sanitization to avoid trusting the hardware state.

Reported-by: Sashiko <sashiko-bot at kernel.org>
Closes: https://lore.kernel.org/all/20260611235702.0E9691F000E9@smtp.kernel.org/
Fixes: 3481fc04d969 ("phy: rockchip: samsung-hdptx: Compute clk rate from PLL config")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>
---
 drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
index d67ced2bf7b2..3a65c26f3efa 100644
--- a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
+++ b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
@@ -2285,10 +2285,20 @@ static u64 rk_hdptx_phy_clk_calc_rate_from_pll_cfg(struct rk_hdptx_phy *hdptx)
 		sdm = div_u64(PLL_REF_CLK * ropll_hw.sdc_deno *
 			      ropll_hw.pms_mdiv * ropll_hw.sdm_num, val);
 
-		if (ropll_hw.sdm_num_sign)
+		if (ropll_hw.sdm_num_sign) {
+			if (sdm > fout) {
+				/*
+				 * Similarly to the case above, it is expected
+				 * the next .set_rate() will help with recovery.
+				 */
+				dev_dbg(hdptx->dev, "Invalid ROPLL hw state: sdm > fout\n");
+				return 0;
+			}
+
 			fout = fout - sdm;
-		else
+		} else {
 			fout = fout + sdm;
+		}
 	}
 
 	return DIV_ROUND_CLOSEST_ULL(fout * 2 * 8, ropll_hw.pms_sdiv * 10 * bpc);

-- 
2.55.0