[PATCH] ASoC: xilinx: formatter_pcm: pass aud_drv_data to irq handlers

[Michal Simek]

On 8/7/26 01:32, Rosen Penev wrote:
> The irq handlers take a struct device pointer and call
> dev_get_drvdata() to obtain the driver data.  However, the driver
> data is only set at the end of probe, after devm_request_irq(),
> so an interrupt taken in between causes the handlers to pass a
> NULL pointer to readl() and crash.
> 
> Pass the private data directly as the devm_request_irq() argument
> instead of the device pointer, matching what the handlers expect.
> 
> Fixes: 6f6c3c36f091 ("ASoC: xlnx: add pcm formatter platform driver")
> Assisted-by: opencode:deepseek-v4-flash-free
> Signed-off-by: Rosen Penev <rosenp at gmail.com>
> ---
>   sound/soc/xilinx/xlnx_formatter_pcm.c | 10 ++++------
>   1 file changed, 4 insertions(+), 6 deletions(-)
> 
> diff --git a/sound/soc/xilinx/xlnx_formatter_pcm.c b/sound/soc/xilinx/xlnx_formatter_pcm.c
> index 7eba3a0205f1..b50306b0fc06 100644
> --- a/sound/soc/xilinx/xlnx_formatter_pcm.c
> +++ b/sound/soc/xilinx/xlnx_formatter_pcm.c
> @@ -280,8 +280,7 @@ static irqreturn_t xlnx_mm2s_irq_handler(int irq, void *arg)
>   {
>   	u32 val;
>   	void __iomem *reg;
> -	struct device *dev = arg;
> -	struct xlnx_pcm_drv_data *adata = dev_get_drvdata(dev);
> +	struct xlnx_pcm_drv_data *adata = arg;
>   
>   	reg = adata->mmio + XLNX_MM2S_OFFSET + XLNX_AUD_STS;
>   	val = readl(reg);
> @@ -299,8 +298,7 @@ static irqreturn_t xlnx_s2mm_irq_handler(int irq, void *arg)
>   {
>   	u32 val;
>   	void __iomem *reg;
> -	struct device *dev = arg;
> -	struct xlnx_pcm_drv_data *adata = dev_get_drvdata(dev);
> +	struct xlnx_pcm_drv_data *adata = arg;
>   
>   	reg = adata->mmio + XLNX_S2MM_OFFSET + XLNX_AUD_STS;
>   	val = readl(reg);
> @@ -636,7 +634,7 @@ static int xlnx_formatter_pcm_probe(struct platform_device *pdev)
>   		}
>   		ret = devm_request_irq(dev, aud_drv_data->mm2s_irq,
>   				       xlnx_mm2s_irq_handler, 0,
> -				       "xlnx_formatter_pcm_mm2s_irq", dev);
> +				       "xlnx_formatter_pcm_mm2s_irq", aud_drv_data);
>   		if (ret) {
>   			dev_err(dev, "xlnx audio mm2s irq request failed\n");
>   			goto clk_err;
> @@ -663,7 +661,7 @@ static int xlnx_formatter_pcm_probe(struct platform_device *pdev)
>   		ret = devm_request_irq(dev, aud_drv_data->s2mm_irq,
>   				       xlnx_s2mm_irq_handler, 0,
>   				       "xlnx_formatter_pcm_s2mm_irq",
> -				       dev);
> +				       aud_drv_data);
>   		if (ret) {
>   			dev_err(dev, "xlnx audio s2mm irq request failed\n");
>   			goto clk_err;

Reviewed-by: Michal Simek <michal.simek at amd.com>

Thanks,
Michal