[PATCH v3 2/2] arm64: dts: ti: k3-am62l3-evm: Add HDMI support

[Swamil Jain]

On 7/23/26 15:55, Swamil Jain wrote:
> From: Devarsh Thakkar <devarsht at ti.com>
> 
> Add the SII9022 HDMI bridge and HDMI connector nodes, along with the
> DPI pinmux configuration connecting VOUT0 to the bridge. Enable the DSS
> and hook up its DPI output port to the SII9022 bridge input, and the
> bridge output to the HDMI connector.
> 
> Signed-off-by: Devarsh Thakkar <devarsht at ti.com>
> Signed-off-by: Swamil Jain <s-jain1 at ti.com>
> ---
>   arch/arm64/boot/dts/ti/k3-am62l3-evm.dts | 95 ++++++++++++++++++++++++
>   1 file changed, 95 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts b/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts
> index 84a0cfaaf196..2982a05f6082 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts
> @@ -44,6 +44,18 @@ usr: button-usr {
>   		};
>   	};
>   
> +	hdmi0: connector-hdmi {
> +		compatible = "hdmi-connector";
> +		label = "hdmi";
> +		type = "a";
> +
> +		port {
> +			hdmi_connector_in: endpoint {
> +				remote-endpoint = <&sii9022_out>;
> +			};
> +		};
> +	};
> +
>   	leds {
>   		compatible = "gpio-leds";
>   		pinctrl-names = "default";
> @@ -192,6 +204,38 @@ exp2: gpio at 23 {
>   		bootph-all;
>   	};
>   
> +	sii9022: bridge-hdmi at 3b {
> +		compatible = "sil,sii9022";
> +		reg = <0x3b>;
> +		interrupt-parent = <&exp1>;
> +		interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
> +		#sound-dai-cells = <0>;
> +		sil,i2s-data-lanes = < 0 >;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&dpi_pins_default>;
> +		bootph-all;
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port at 0 {
> +				reg = <0>;
> +
> +				sii9022_in: endpoint {
> +					remote-endpoint = <&dpi_out>;
> +				};
> +			};
> +
> +			port at 1 {
> +				reg = <1>;
> +
> +				sii9022_out: endpoint {
> +					remote-endpoint = <&hdmi_connector_in>;
> +				};
> +			};
> +		};
> +	};
>   };
>   
>   &i2c2 {
> @@ -221,6 +265,41 @@ usb_con_hs: endpoint {
>   };
>   
>   &pmx0 {
> +	dpi_pins_default: dpi-default-pins {
> +		pinctrl-single,pins = <
> +			AM62LX_IOPAD(0x00e4, PIN_OUTPUT, 1) /* (L20) GPMC0_CSn0.VOUT0_VSYNC */
> +			AM62LX_IOPAD(0x00dc, PIN_OUTPUT, 1) /* (N21) GPMC0_WPn.VOUT0_HSYNC */
> +			AM62LX_IOPAD(0x00e8, PIN_OUTPUT, 1) /* (L19) GPMC0_CSn1.VOUT0_PCLK */
> +			AM62LX_IOPAD(0x00e0, PIN_OUTPUT, 1) /* (M21) GPMC0_DIR.VOUT0_DE */
> +			AM62LX_IOPAD(0x0078, PIN_OUTPUT, 1) /* (L22) GPMC0_AD0.VOUT0_DATA0 */
> +			AM62LX_IOPAD(0x007c, PIN_OUTPUT, 1) /* (L23) GPMC0_AD1.VOUT0_DATA1 */
> +			AM62LX_IOPAD(0x0080, PIN_OUTPUT, 1) /* (K22) GPMC0_AD2.VOUT0_DATA2 */
> +			AM62LX_IOPAD(0x0084, PIN_OUTPUT, 1) /* (J23) GPMC0_AD3.VOUT0_DATA3 */
> +			AM62LX_IOPAD(0x0088, PIN_OUTPUT, 1) /* (K23) GPMC0_AD4.VOUT0_DATA4 */
> +			AM62LX_IOPAD(0x008c, PIN_OUTPUT, 1) /* (H22) GPMC0_AD5.VOUT0_DATA5 */
> +			AM62LX_IOPAD(0x0090, PIN_OUTPUT, 1) /* (H23) GPMC0_AD6.VOUT0_DATA6 */
> +			AM62LX_IOPAD(0x0094, PIN_OUTPUT, 1) /* (J22) GPMC0_AD7.VOUT0_DATA7 */
> +			AM62LX_IOPAD(0x0098, PIN_OUTPUT, 1) /* (H19) GPMC0_AD8.VOUT0_DATA8 */
> +			AM62LX_IOPAD(0x009c, PIN_OUTPUT, 1) /* (H20) GPMC0_AD9.VOUT0_DATA9 */
> +			AM62LX_IOPAD(0x00a0, PIN_OUTPUT, 1) /* (H21) GPMC0_AD10.VOUT0_DATA10 */
> +			AM62LX_IOPAD(0x00a4, PIN_OUTPUT, 1) /* (H18) GPMC0_AD11.VOUT0_DATA11 */
> +			AM62LX_IOPAD(0x00a8, PIN_OUTPUT, 1) /* (G23) GPMC0_AD12.VOUT0_DATA12 */
> +			AM62LX_IOPAD(0x00ac, PIN_OUTPUT, 1) /* (G22) GPMC0_AD13.VOUT0_DATA13 */
> +			AM62LX_IOPAD(0x00b0, PIN_OUTPUT, 1) /* (F22) GPMC0_AD14.VOUT0_DATA14 */
> +			AM62LX_IOPAD(0x00b4, PIN_OUTPUT, 1) /* (F23) GPMC0_AD15.VOUT0_DATA15 */
> +			AM62LX_IOPAD(0x00b8, PIN_OUTPUT, 1) /* (L21) GPMC0_CLK.VOUT0_DATA16 */
> +			AM62LX_IOPAD(0x00c0, PIN_OUTPUT, 1) /* (N19) GPMC0_ADVn_ALE.VOUT0_DATA17 */
> +			AM62LX_IOPAD(0x00c4, PIN_OUTPUT, 1) /* (N20) GPMC0_OEn_REn.VOUT0_DATA18 */
> +			AM62LX_IOPAD(0x00c8, PIN_OUTPUT, 1) /* (M19) GPMC0_WEn.VOUT0_DATA19 */
> +			AM62LX_IOPAD(0x00cc, PIN_OUTPUT, 1) /* (P23) GPMC0_BE0n_CLE.VOUT0_DATA20 */
> +			AM62LX_IOPAD(0x00d0, PIN_OUTPUT, 1) /* (P22) GPMC0_BE1n.VOUT0_DATA21 */
> +			AM62LX_IOPAD(0x00d4, PIN_OUTPUT, 1) /* (N23) GPMC0_WAIT0.VOUT0_DATA22 */
> +			AM62LX_IOPAD(0x00d8, PIN_OUTPUT, 1) /* (N22) GPMC0_WAIT1.VOUT0_DATA23 */

> +			AM62LX_IOPAD(0x00ec, PIN_OUTPUT, 5) /* (M23) GPMC0_CSn2.VOUT0_EXTPCLKIN */

NACK. Will respin the patch, as "VOUT0_EXTPCLKIN" should be configured 
as PIN_INPUT.

Regards,
Swamil.

> +		>;
> +		bootph-all;
> +	};
> +
>   	gpio0_ioexp_intr_pins_default: gpio0-ioexp-intr-default-pins {
>   		pinctrl-single,pins = <
>   			AM62LX_IOPAD(0x01b0, PIN_INPUT, 7) /* (B12) SPI0_D1.GPIO0_91 */
> @@ -321,6 +400,22 @@ AM62LX_IOPAD(0x0004, PIN_OUTPUT, 0) /* (AA23) WKUP_UART0_TXD */
>   	};
>   };
>   
> +&dss {
> +	status = "okay";
> +	bootph-all;
> +};
> +
> +&dss_ports {
> +	/* VP1: DPI Output */
> +	port at 0 {
> +		reg = <0>;
> +
> +		dpi_out: endpoint {
> +			remote-endpoint = <&sii9022_in>;
> +		};
> +	};
> +};
> +
>   &sdhci0 {
>   	/* eMMC */
>   	pinctrl-names = "default";