[RFC PATCH v6 7/9] accel/rocket: add RK3576 NPU (RKNN) support

[Jiaxing Hu]

Hi Chaoyi,

> I think it should be for every submit. That is, when you set
> task_count_clear, you should also set task_last_layer_clear at the same
> time.

That is what the driver does, and now it does it on purpose rather than by
inheritance. v7 writes

  PC_TASK_CON_TASK_LAST_LAYER_CLEAR |
  PC_TASK_CON_TASK_COUNT_CLEAR |
  PC_TASK_CON_TASK_PP_EN |
  PC_TASK_CON_TASK_NUMBER(n)

per submit, with the three RK3576 bits at 16, 17 and 18 and the RK3588 ones at
12 and 13 beside them.

Thank you for both answers. The layout settles a register this driver had only
been able to reach by comparing traces, and the bit at 18 is one it was setting
without knowing what it was.

Jiaxing