[PATCH v3 6/7] ARM: dts: nxp: imx6qdl-pico: Replace clock-frequency in camera sensor node

[Laurent Pinchart]

The clock-frequency for camera sensors has been deprecated in favour of
the assigned-clocks and assigned-clock-rates properties. Replace it in
the device tree.

Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
---
Changes since v1:

- Drop added blank line
---
 arch/arm/boot/dts/nxp/imx/imx6qdl-pico.dtsi | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-pico.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico.dtsi
index ca4cb986efbc..0cc05d084f9b 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-pico.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico.dtsi
@@ -233,7 +233,9 @@ camera at 3c {
 		pinctrl-0 = <&pinctrl_ov5645>;
 		reg = <0x3c>;
 		clocks = <&clks IMX6QDL_CLK_CKO2>;
-		clock-frequency = <24000000>;
+		assigned-clocks = <&clks IMX6QDL_CLK_CKO2>;
+		assigned-clock-rates = <24000000>;
+
 		vdddo-supply = <&reg_1p8v>;
 		vdda-supply = <&reg_2p8v>;
 		vddd-supply = <&reg_1p5v>;
-- 
Regards,

Laurent Pinchart