[PATCH V3 1/6] dmaengine: zynqmp_dma: Fix PM usage count handling in probe error path

[Golla Nagendra]

When pm_runtime_resume_and_get() succeeds during probe, it increments
the usage count and enables clocks. If a later step (e.g., channel
probe) fails, the error path only called pm_runtime_disable() without
a matching pm_runtime_put_sync(), leaking the reference and the clock
enable.

Add an else branch to drop the usage count acquired by
pm_runtime_resume_and_get() when runtime PM is still enabled, letting
the PM core suspend/disable clocks on the success-then-later-failure
path.

Fixes: 64c6f7da8c2c ("dmaengine: zynqmp_dma: Add runtime pm support")
Signed-off-by: Golla Nagendra <nagendra.golla at amd.com>
---
Changes in V3:
- New patch: split from V2 2/3 per Frank Li's review to keep the PM usage
  count fix separate from the per-channel reset changes
---
 drivers/dma/xilinx/zynqmp_dma.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/dma/xilinx/zynqmp_dma.c b/drivers/dma/xilinx/zynqmp_dma.c
index f6a812e49ddc..87986f65d24c 100644
--- a/drivers/dma/xilinx/zynqmp_dma.c
+++ b/drivers/dma/xilinx/zynqmp_dma.c
@@ -1152,6 +1152,8 @@ static int zynqmp_dma_probe(struct platform_device *pdev)
 err_disable_pm:
 	if (!pm_runtime_enabled(zdev->dev))
 		zynqmp_dma_runtime_suspend(zdev->dev);
+	else
+		pm_runtime_put_sync(zdev->dev);
 	pm_runtime_disable(zdev->dev);
 	return ret;
 }
-- 
2.43.7