[PATCH v2 2/2] arm64: dts: st: add power-domains to sdmmc1 on stm32mp231

[Alexandre TORGUE]

Hi Dario

On 5/30/26 15:56, Dario Binacchi wrote:
> The sdmmc1 node was introduced early in the SoC bring-up before power
> domains were systematically mapped. Add the missing power-domains
> property to align it with the rest of the peripheral nodes.
> 
> Signed-off-by: Dario Binacchi <dario.binacchi at amarulasolutions.com>
> 
> ---
> 
> Changes in v2:
> - Add patch. Suggested by Sashiko
> 
>   arch/arm64/boot/dts/st/stm32mp231.dtsi | 1 +
>   1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm64/boot/dts/st/stm32mp231.dtsi b/arch/arm64/boot/dts/st/stm32mp231.dtsi
> index 9e1d240888ff..0feb8943efae 100644
> --- a/arch/arm64/boot/dts/st/stm32mp231.dtsi
> +++ b/arch/arm64/boot/dts/st/stm32mp231.dtsi
> @@ -727,6 +727,7 @@ sdmmc1: mmc at 48220000 {
>   				cap-mmc-highspeed;
>   				max-frequency = <120000000>;
>   				access-controllers = <&rifsc 76>;
> +				power-domains = <&cluster_pd>;
>   				status = "disabled";
>   			};
>   

Those 2 patches seem already included in the following series:
https://lore.kernel.org/all/20260703065110.1433283-1-dario.binacchi@amarulasolutions.com/

regards
Alex