[PATCH] phy: zynqmp: register PHY provider after probe initialization

[Radhey Shyam Pandey]

Register the OF PHY provider only after saved_regs allocation and
runtime PM setup complete successfully. Publishing the provider
mid-probe allowed concurrent consumers to obtain a phy via xpsgtr_xlate()
while probe could still fail, leaving them with references into driver
state that devres would free on the error path.

Reported-by: Sashiko <sashiko-bot at kernel.org>
Link: https://lore.kernel.org/all/20260720155732.9DA581F000E9@smtp.kernel.org
Fixes: b3db66f62446 ("phy: xilinx: add runtime PM support")
Fixes: 5af9b304bc60 ("phy: xilinx: phy-zynqmp: Fix SGMII linkup failure on resume")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey at amd.com>
---
 drivers/phy/xilinx/phy-zynqmp.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/phy/xilinx/phy-zynqmp.c b/drivers/phy/xilinx/phy-zynqmp.c
index 240626b55475..8930cbe24b5a 100644
--- a/drivers/phy/xilinx/phy-zynqmp.c
+++ b/drivers/phy/xilinx/phy-zynqmp.c
@@ -1060,13 +1060,6 @@ static int xpsgtr_probe(struct platform_device *pdev)
 					    xpsgtr_status_read);
 	}
 
-	/* Register the PHY provider. */
-	provider = devm_of_phy_provider_register(&pdev->dev, xpsgtr_xlate);
-	if (IS_ERR(provider)) {
-		dev_err(&pdev->dev, "registering provider failed\n");
-		return PTR_ERR(provider);
-	}
-
 	gtr_dev->saved_regs = devm_kmalloc(gtr_dev->dev,
 					   sizeof(save_reg_address),
 					   GFP_KERNEL);
@@ -1082,6 +1075,14 @@ static int xpsgtr_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	provider = devm_of_phy_provider_register(&pdev->dev, xpsgtr_xlate);
+	if (IS_ERR(provider)) {
+		dev_err(&pdev->dev, "registering provider failed\n");
+		pm_runtime_put(gtr_dev->dev);
+		pm_runtime_disable(gtr_dev->dev);
+		return PTR_ERR(provider);
+	}
+
 	return 0;
 }
 

base-commit: ea2bff00da89d7767d677bb68470130ba96f4928
-- 
2.44.4