[PATCH v5 6/6] ARM: dts: aspeed: g6: add aspeed,vuart-over-pci prop to vuart3 and 4

[Tan Siewert]

> The VUART 3 and 4 are VUART over PCI.
> Set this flag to indicate this information.
> Also set the syscon phandle.
> 
> Signed-off-by: Grégoire Layet <gregoire.layet at 9elements.com>
>
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
> index 7c02633f2bd6..fbd7ab6332a1 100644
> --- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
> +++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
> @@ -722,7 +722,9 @@ vuart3: serial at 1e787800 {
>  				reg-shift = <2>;
>  				interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
>  				clocks = <&syscon ASPEED_CLK_APB2>;
> +				aspeed,scu-syscon = <&syscon>;
>  				no-loopback-test;
> +				aspeed,vuart-over-pci;
>  				status = "disabled";
>  			};

dt-style check fails with:

    arch/arm/boot/dts/aspeed/aspeed-g6.dtsi:723: [property-order] property 'interrupts' out of canonical order (should sort before 'reg-shift')
    arch/arm/boot/dts/aspeed/aspeed-g6.dtsi:724: [property-order] property 'clocks' out of canonical order (should sort before 'interrupts')
    arch/arm/boot/dts/aspeed/aspeed-g6.dtsi:726: [property-order] property 'no-loopback-test' out of canonical order (should sort before 'aspeed,scu-syscon')
    arch/arm/boot/dts/aspeed/aspeed-g6.dtsi:728: [required-blank-lines] "status" must be preceded by a blank line

>  
> @@ -742,7 +744,9 @@ vuart4: serial at 1e788800 {
>  				reg-shift = <2>;
>  				interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
>  				clocks = <&syscon ASPEED_CLK_APB2>;
> +				aspeed,scu-syscon = <&syscon>;
>  				no-loopback-test;
> +				aspeed,vuart-over-pci;
>  				status = "disabled";
>  			};
>  

Same here:

    arch/arm/boot/dts/aspeed/aspeed-g6.dtsi:742: [line-length] line exceeds 80 columns (92)
    arch/arm/boot/dts/aspeed/aspeed-g6.dtsi:745: [property-order] property 'interrupts' out of canonical order (should sort before 'reg-shift')
    arch/arm/boot/dts/aspeed/aspeed-g6.dtsi:746: [property-order] property 'clocks' out of canonical order (should sort before 'interrupts')
    arch/arm/boot/dts/aspeed/aspeed-g6.dtsi:748: [property-order] property 'no-loopback-test' out of canonical order (should sort before 'aspeed,scu-syscon')
    arch/arm/boot/dts/aspeed/aspeed-g6.dtsi:750: [required-blank-lines] "status" must be preceded by a blank line

Tan

-- 
Tan Siewert <tan.siewert at 9elements.com>